Hand operated manual syringe assembly with luer lock tip attachment supplied with stainless steel blunt end dispense tips 1" long. A multi purpose evaluation pack of clear 10ml/ 10cc manual syringes with luer lock dispensing tips.

Clear syringe barrel includes plunger rod and rubber piston. Luer lock twist-on tip attachment. Tips are 1" long blunt end wide bore 14, 15 and 16 gauge. Non sterile manual 10cc/ 10ml size syringe barrel assembly. Natural (clear) barrel high density polypro. Luer lock for twist on attachment of needle tips. Syringe assembly incorporates the 400 series syringe barrel, 400 series plastic plunger rod and 400 series rubber piston. These syringes are industry compliant low friction polypropylene.

Suited for use with most fluids, adhesives, solvents, primers, inks, paints, lubricants and activators. Clear barrel without graduations. AD series general purpose tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. Tips are colour coded for gauge size. The tip features a slightly rounded internal design where the shaft meets the hub to improve fluid flow and reduce flow restriction. This allows for a lower pressure to be used for dispensing of liquids and pastes.

Please note that these items are shipped in sealed and labelled packs direct from stock.

---

The kit includes: -

Clear syringe luer lock 10ml or 10cc size x 2
Rubber wiper piston 10ml or 10cc size x 2
Plastic push rod 10ml or 10cc size x 2
Tip Cap Seal Black x 2
14 GA tip 1" long Olive 1.55mm ID x 2
15 GA tip 1" long Amber 1.37mm ID x 2
16 GA tip 1" long Grey 1.19mm ID x 2
Commodity Code: 39269097

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: SA7992
• Materials: Polypropylene/ Stainless Steel
• Syringe Length: 3.55" - 90.17mm
• Syringe Outer Diameter: 0.71" - 18.03mm
• Syringe Inner Diameter: 0.63" - 16.00mm
• Needle Tip Tube Length: 1" - 25.4mm
• Connection: Luer Lock

The kit includes: - Part MS410LL-1 10ml or 10cc size x 2 Part AD714100 14 GA tip 1" long Olive 1.55mm ID x 2 Part AD715100 15 GA tip 1" long Amber 1.37mm ID x 2 Part AD716100 16 GA tip 1" long Grey 1.19mm ID x 2

Dispensing tips and syringe barrels are designed to work with most low, medium and high viscosity fluids, adhesives, inks, pastes, gels and lubricants. This design ensures syringe barrels do not come loose from the tip. The luer lock tip attachment offers secure dispensing under pressure.

Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.