Hand operated manual syringe assembly with luer lock tip attachment supplied with stainless steel blunt end dispense tips 0.5" long. A multi purpose evaluation pack of clear 3ml/ 3cc manual syringes with luer lock dispensing tips. Clear syringe barrel includes plunger rod and rubber piston. Luer lock twist-on tip attachment. Tips are 0.5" long blunt end small bore 21, 22 and 23 gauge. Manual 3cc/ 3ml size syringe barrel assembly.

Natural (clear) barrel high density polypro. Luer lock for twist on attachment of needle tips. These syringes are industry compliant low friction polypropylene. Suited for use with most fluids, adhesives, solvents, primers, inks, paints, lubricants and activators. Clear barrel without graduations. AD series general purpose tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals.

Tips are colour coded for gauge size. The tip features a slightly rounded internal design where the shaft meets the hub to improve fluid flow and reduce flow restriction. This allows for a lower pressure to be used for dispensing of liquids and pastes. Please note that these items are shipped in sealed and labelled packs direct from stock.

Kit Contains: -
2 x 3ml Syringes Luer Lock

2 x Tip Caps Orange
2 x 21GA 0.5" Long Tips
2 x 22GA 0.5" Long Tips
2 x 23GA 0.5" Long Tips

---

Part ID: SA7989
Materials: Polypropylene/ Stainless Steel
Syringe Length: 2.94" - 74.67mm
Syringe Outer Diameter: 0.43" - 10.92mm
Syringe Inner Diameter: 0.35" - 8.89mm
Needle Tip Tube Length: 0.50" - 12.5mm
Connection: Luer Lock
Commodity Code: 39269097
Contains 10 Parts

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: SA7989
• Materials: Polypropylene/ Stainless Steel
• Syringe Length: 2.94" - 74.67mm
• Syringe Outer Diameter: 0.43" - 10.92mm
• Syringe Inner Diameter: 0.35" - 8.89mm
• Needle Tip Tube Length: 0.5" - 12.5mm
• Connection: Luer Lock

The kit includes: -

Part 403LL-1 Clear syringe luer lock 3ml or 3cc size x 2
Part 403L-2 Rubber wiper piston 3ml or 3cc size x 2
Part 403L-4 Plastic push rod 3ml or 3cc size x 2
Part SE421050PK 21 GA tip 1/2" long Purple 0.330 mm ID x 2
Part SE422050PK 22 GA tip 1/2" long Blue 0.406 mm ID x 2
Part SE423050PK 23 GA tip 1/2" long Orange 0.254 mm ID x 2

Dispensing tips and syringe barrels are designed to work with most low, medium and high viscosity fluids, adhesives, inks, pastes, gels and lubricants. Syringe barrels are moulded in high density plastics and have much thicker walls than a medical grade syringe. This design ensures syringe barrels do not come loose from the tip. The luer lock tip attachment offers secure dispensing under pressure.

Items are shipped in the UK by Interlink Express and next day tracked and insured service from stock. For Europe deliveries, items are shipped via DPD or Air Express. For all international shipments, items are sent RM Signed-For or FedEx.