Precision needle series are stainless steel shafts with a luer lock
polypropylene hub. This line of dispensing needles is burr-free, and
electro-polished shaft for unobstructed and consistent material flow. In
addition they are silicone free. Designed to dispense most viscosity fluids and
adhesives. These tips are epoxy bonded from shaft to hub and are supplied at an
economical price.
Tips are colour coded for gauge size. The tip features a tapered internal
design where the shaft meets the hub to improve fluid flow and reduce any
restriction. This allows for a lower pressure to be used for dispensing liquids
and pastes.
MPN: E18-1/4-1000
Material: Polypropylene/ Stainless Steel
Hub Colour: Pink
ID: 0.033" - 0.85 mm
OD: 0.050" - 1.27 mm
Length: 0.25" - 6.35 mm
Details: Industrial Grade, Silicone Free
Commodity Code: 39174000
Brand: Adhesive Dispensing Ltd
Pack Size: 1000
Adhesive Dispensing Ltd provide a wide range of
equipment options for dispensing almost all assembly fluids - from watery
liquids, solvents, primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
- Material: Polypropylene/ Stainless Steel
- Colour: Pink Hub
- ID: 0.033" - 0.85mm
- OD: 0.050" - 1.27mm
- Tube Length: 0.25" - 6.35mm
- Details: Industrial grade, Silicone Free
General purpose tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. For Cyanoacrylate adhesives, we recommend using our Teflon, Teflon Lined or Polypro tips. For high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds, we suggest the use of our tapered tips.
All tips are safe for use up to 100 psi pressure. These tips are precision manufactured for industrial use.
Tips are certified silicone-free components to ensure they do not contaminate any fluids or adhesives that are dispensed from them.
Tips are shipped by tracked courier.
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.
|
