A04 is a High Strength, medium viscosity formulation for permanent locking of studs and bolts up to 1" (25mm) diameter. Recommended for use on engine studs, cylinder block studs, etc.

This adhesive can be applied using our syringe barrel dispensers or direct from the large bottles using our metering valves, controller and pressure pot. All adhesives are shipped with TDS and MSDS.

---

Part ID: A04
Resin: Dimethacrylate
Bottle Size: 250 ml LDPE bottles
Colour: Red
Viscosity: 1,800 to 5,000 cps
Max Gap Fill: 0.18mm
Temp. Range: -60�C to 150�C
Fixture Speed: 30 minutes @ 25�C
Full Cure Time: 24 hours @ 20�C
Breakaway Strength: 16 to 28 Nm
Prevailing Strength: 5 to 17 Nm

• Part ID: A04
• Resin: Dimethacrylate
• Bottle Size: 250 ml LDPE bottles
• Colour: Red
• Viscosity: 1,800 to 5,000 cps
• Max Gap Fill: 0.18mm
• Temp. Range: -60�C to 150�C
• Fixture Speed: 30 minutes @ 25�C
• Full Cure Time: 24 hours @ 20�C
• Breakaway Strength: 16 to 28 Nm
• Prevailing Strength: 5 to 17 Nm

Materials should not be used without consulting the MSDS, which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.

Adhesives are shipped by tracked courier.