H42 is designed for the sealing and locking of metal fittings and pipes. The product is a single component anaerobic, medium strength thixotropic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.

This adhesive can be applied using our syringe barrel dispensers or direct from the large bottles using our metering valves, controller and pressure pot. All adhesives are shipped with TDS and MSDS.

---

Part ID: H42
Resin: Methacrylate Ester
Bottle Size: 50 ml LDPE bottles
Colour: Brown
Viscosity: 1200 - 2750 cps
Max Gap Fill: 0.20 mm
Temp. Range: - 54 to 150 C
Fixture Speed: 30 to 90 minutes @ 25 C
Full Cure Time: 24 hours @ 20 C
Breakaway Strength: 15 Nm
Prevailing Strength: 9 Nm

---

Technical Data Sheet (TDS)
Material Safety Data Sheet (MSDS)

---

• Part ID: H42 Resin: Dimethacrylate
• Bottle Size: 50 ml LDPE bottles
• Colour: Brown Viscosity: 1200 - 2700 cps
• Max Gap Fill: 0.20mm
• Temp. Range: - 50 to 150 C
• Fixture Speed: 30 to 90 minutes @ 25 C
• Full Cure Time: 24 hours @ 20 C
• Breakaway Strength: 15 Nm
• Prevailing Strength: 9 Nm

Materials should not be used without consulting the MSDS, which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.

Adhesives are shipped by tracked courier.