A01 is designed for the bonding of cylindrical fitting parts. The product is a single component anaerobic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.

A01 is particularly suitable for uses including the filling of porosity in welds, castings and powdered metal parts..

This adhesive can be applied using our syringe barrel dispensers or direct from the large bottles using our metering valves, controller and pressure pot. All adhesives are shipped with TDS and MSDS.

---

Technical Data Sheet (TDS)
Material Safety Data Sheet (MSDS)

---

Part ID: A01
Resin: Dimethacrylate
Bottle Size: 50 ml LDPE bottles
Colour: Green
Viscosity: 100 to 150 cps
Max Gap Fill: 0.10 mm
Temp. Range: - 54 to 200 C
Fixture Speed: 10 - 15 minutes @ 22 C
Full Cure Time: 24 hours @ 20 C
Breakaway Strength: 15 to 40 Nm
Prevail Torque: 25 to 50 Nm

---

• Part ID: A01 Resin: Dimethacrylate
• Bottle Size: 50 gram LDPE bottles
• Colour: Green
• Viscosity: 150 cps
• Max Gap Fill: 0.10 mm
• Temp. Range: - 50 to 200�C
• Fixture Speed: 15 minutes @ 22�C
• Full Cure Time: 24 hours @ 20�C
• Shear Strength: >3500 psi (>24Nmm2)

Materials should not be used without consulting the MSDS, which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.

Adhesives are shipped either from stock or when they become available in the UK by tracked couriers.