P77 is designed for the sealing and locking of metal fittings and pipes. The product is a single component anaerobic, medium strength thixotropic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.

This adhesive can be applied using our syringe barrel dispensers or direct from the large bottles using our metering valves, controller and pressure pot. All adhesives are shipped with TDS and MSDS.

---

Part ID: P77
Resin: Acrylic
Bottle Size: 50 ml LDPE bottles
Colour: Yellow
Viscosity: 70,000 - 130,000 cps
Max Gap Fill: 0.25 mm
Temp. Range: - 54 to 150 C
Fixture Speed: 30 - 90 Minutes @ 25 C
Full Cure Time: 24 hours @ 20 C
Breakaway Strength: 11 Nm
Prevailing Strength: 6 Nm

---

Technical Data Sheet (TDS)
Material Safety Data Sheet (MSDS)

---

• Part ID: P77 Resin: Dimethacrylate
• Bottle Size: 50 ml LDPE bottles
• Colour: Yellow Viscosity: 70000 - 130000 cps
• Max Gap Fill: 0.25mm
• Temp. Range: - 50 to 150 C
• Fixture Speed: 30 to 90 minutes @ 25 C
• Full Cure Time: 24 hours @ 20 C
• Breakaway Strength: 11 Nm
• Prevailing Strength: 6 Nm

Materials should not be used without consulting the MSDS, which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.

Adhesives are shipped by tracked courier.