A14 is designed for the bonding of cylindrical parts particularly where disassembly is required for servicing. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Applications include bearing retention onto housings and shafts.

A14 is a medium strength retainer for retention of bearings, cylindrical parts, bushes and oil seals that may require disassembly. Parts can be dismantled using hand tools. Eliminates press fits. Stops corrosion. Mounts bearings. The industrial grade material is designed for applications that may need disassembly for service or maintenance access including high strength retention or bearings, locking of keys and spines, bonding rotors, bushes and sleeves to shafts, securing loose or worn parts.

This adhesive can be applied using our syringe barrel dispensers or direct from the large bottles using our metering valves, controller and pressure pot. All adhesives are shipped with TDS and MSDS.

---

Technical Data Sheet (TDS)
Material Safety Data Sheet (MSDS)

---

Part ID: A14
Resin: Dimethacrylate
Bottle Size: 50 ml LDPE bottles
Colour: Yellow
Viscosity: 1200 - 2800 cps
Max Gap Fill: 0.20 mm
Temp. Range: - 54 to 150 C
Fixture Speed: 10-15 minutes @ 22 C
Full Cure Time: 24 hours @ 20 C
Shear Strength: 8 to 16 Nmm2

---

• Part ID: A14
• Resin: Dimethacrylate
• Bottle Size: 50 ml LDPE bottles
• Colour: Yellow
• Viscosity: 1500 cps
• Max Gap Fill: 0.20 mm
• Temp. Range: -50 to 150�C
• Fixture Speed: 10-15 minutes @ 22�C
• Full Cure Time: 24 hours @ 20�C
• Shear Strength: 8 to 16 Nmm2

Materials should not be used without consulting the MSDS, which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.

Adhesives are shipped by courier.