|
|
|
|
A high pressure needle valve designed for micro-shot dispensing of high
viscosity fluids that need to be pressurized up to 3500 psi. The
dispensing valve also has a shot size adjustment feature, which can
fine-tune the valve for precise dispensing deposits.
The valve is opened and closed by applying pressure to the ports using a valve controller (TS250 dispenser).
The valve can be operated with as little as 30 psi pressure. Material is supplied
to the stainless steel body through a 1/4" NPT female port. Fluid
pressure may be as high as 3500psi. Shot size and flow rate are
controlled by the tip size, fluid pressure and the duration that the
valve is open.
All valves are shipped with a luer lock fluid elbow fitting, airline hose with male quick connect, tip cap end seal, selection of dispensing tips and user guide. Valves are supplied with a 1 Year warranty. Do not use this valve for reactive adhesives and fluids such as Cyanoacrylates.
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Part ID: LV-0126RJ
- Wetted Materials: Stainless Steel, Anodised Aluminium
- Min Shot Size: 0.01 cc/ ml
- Max Fluid Pressure: 3500 psi
- Activation Pressure: 30 to 95 psi minimum
- Warranty: 1 Year
Specifications Item Part # Qty Description 1 561027 1 needle adapter 2 561028 1 needle seat 3 561029 1 valve needle 4 561030NM 1 fluid body 5 561031NM 1 packing 6 561032NM 1 packing nut 7 561033NM 1 end cap 8 561034NM 1 adjuster 9 561035 1 cap nut 10 561036 1 006 VT O-ring 11 561037 1 piston 13 561038NM 1 spacer bracket 13 561039 1 upper air body 14 561040 1 021BN O-ring 15 561041NM 1 lock nut 16 561042NM 1 spacer 17 561043NM 4 cap screw 18 561044NM 4 cap screw 19 561045 1 119 BN O-ring 20 561046NM 1 008 BN O-ring 21 561047NM 1 009 BN O-ring 22 561048 1 spring 23 561049NM 1 5/16" C clip 24 561050NM 2 cap nut 25 561051 1 luer adapter
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- High-pressure fluid input up to 3500 psi
- Suitable for very high viscosity fluids
- Stainless Steel construction
- Stroke adjustment provides shot size control
|
|
|
|
|
|
|
|
|