Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 30cc/ 30ml size syringe barrels. Ideal for low volume production, re-work or repair work.
Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze.
Push the button to release plunger rod. Simple bayonet twist on/ twist off barrel attachment. Ideal for applying solder paste, solder flux, RTV, silicones, sealants, gels, greases, compounds, PVA glues and other liquids. Each Syringe Gun includes the 30ml manual hand gun, (1) dispensing reservoir with piston, (1) storage end and tip caps, (1) dispensing tip.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure.
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Materials: Polypro/ Nylon
- Capacity: 30cc or 30ml
- Length: 175mm
- Height: 135mm
- Weight: 110 grams
- Colour: Blue Handle/ White Trigger
- Warranty: 1 Year
This product is shipped with the following:
1 x 30cc clear barrel (part code 7300LL1NPK)
1 x 30cc white wiper piston (part code 730009WPK)
1 x 30cc red end cap (part code 73000CRPK)
1 x black tip cap (part code 7015LLBPK)
1 x 18 gauge tapered tip (part code TTN18)
Order part code TS730SG-KIT if a full component kit is required.Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|
