Robots provide
precise control over adhesive placement, from exact beads, to repeat
timed dots or potting of components. Programming is simple via a teach
pendant. Even complex patterns can be created simply. Storage is to
internal flash memory allowing for up to 255 different programs to be created.
The J2203 series robots
are designed to minimize footprint and maximize efficiencies in assembly
line operations. This design is based on the idea of worker
supplementation to increase the efficiency of workers in order to reduce
labour content. With the JR2000 Series robots, assembly line workers
stay busy loading and unloading fixtures while the robot is performing
precision assembling tasks.
Teaching the J2203 series
desktop robot is easy with the large, 7-line LCD screen. Position of the
robot and expanded views of the point jobs are achieved with the large
teaching pendant and prove to be an asset when programming. J2203 series
software has eliminated the need to learn complicated programming
languages. An Interactive dialog based software allows the user to
easily walk through setup of a program..
High speeds are achieved reducing time spent hand applying adhesives.
Accuracy of placement and volume of fluid ensures zero waste, mess and
error. Robots will dispense most materials including adhesives, pastes,
epoxies, gels, silicones, sealants, RTV's, oils, grease, anaerobics,
cyanoacrylates, inks and lubricants.
The J2203 series robots
have a maximum base work area of 200mm x 200mm and a up and down
movement of 50mm. With 3 axis
indexing for lines or dots to flat or uneven substrates.
All robots are supplied with a digital syringe controller, I/O cable, CE
compliance start/ stop box, teach pendant, airline hoses, syringe
bracket, slide adjustment and detailed instruction manuals. X/Y/Z Work area (mm): 200 / 200 / 50
Worktable load / Tool: 7 kg. / 3.5 kg.
Speed PTP: 5-500 mm/sec X&Y, 2.5-250mm/sec Z
Speed CP: 0.1-500mm/sec XY & 0.1-250mm/sec Z
Repeatability: +/- 0.01mm
Resolution: 0.01mm/ Axis
Data Memory: 255 Programs - 30,000 points
Drive Sys. / Stepping motor: 5-phase micro stepping motor
Operation system: Point To Point and Continuous Path
Interpolation: XYZ simultaneous (CP) 3D linear interpolation
Teaching method: Remote & Manual Data Input (MDI) teaching
CPU: 32 bit (MC68EC020, MC68882)
PLC: 50 programs, 100 steps for each program
I/O signals: 16 input & 16 output signals
External Interface: USB / RS232
Working temperature: 0 - 40� C
Relative humidity: 20 � 95% no condensation
Power Supply: AC 110V, AC 180-250V
Dimensions (WxDxH): 320x 665 x 377
Weight: 42 lbs (18 kg)
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
|
|
|
Applications |
|
|
|
Dotting
|
|
Beading
|
|
Potting
|
|
Bonding
|
|
Sealing
|
|
Lubricating | |