GB35 is a clear ethyl cyanoacrylate, with higher peel and shock resistance than other grades. GB35 with a longer setting time than regular Cyanoacrylate adhesive and it allows enough time for users to put materials together after application.
It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc. GB35 is a one-component, solvent-free system and does not require the use of a catalyst, heat or clamps. When a thin layer of GB35 applied between two surfaces comes into contact with atmospheric moisture, a rapid polymerisation occurs producing the ultimate bond.
Suitable for PVC, ABS, Polycarbonate, Polystyrene, Steel, Stainless Steel, Aluminium, Copper, Neoprene, Natural Rubber, etc. Fixture times vary from materials being bonded.
Part ID: GB35-50
Bottle Size: 50 gram
Material: Ethyl
Colour: Clear
Viscosity: 1500 cps
Max Gap Fill: 0.20mm
Temp. Range: - 55 to 125 C
Fixture Time: 30 to 120 seconds @ 20 C
Full Strength Cure: 24 Hours
Typical Strength: 21 N/mm2
Specific Gravity: 1.06
These adhesives are UK manufactured and provided with a minimum 6 to 12 month shelf life.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
   
- Part ID: GB35 Material: Ethyl
- Bottle Size: 50 gram
- Colour: Clear
- Viscosity: 1500 cps
- Max Gap Fill: 0.20mm
- Temp. Range: -55 to 125 C
- Fixture Time: < 30-120 seconds @ 20 C
- Typical Strength: 21N/mm2
Materials should not be used without consulting the MSDS, which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.
Adhesives are shipped by tracked courier.
|
