|
|
|
|
Flow-Seal Pens & Bottles
Flow-seal environmental pens
and bottles channel controlled amounts of no-clean flux, rma, solvents,
lubricants, masking and water-based liquids. Flow-seal products prevent
evaporation of material and conform to current regulations for controlling
substances capable of evaporation hazard. A unique dispensing valve prevents
flooding and spattering, releasing material in controlled amounts to the nib
(tip).
The pen or bottle is in two
parts (cap and reservoir) and is easily assembled. The reservoir should be
filled with material to within 0.75" (19mm) of the top; this air chamber
allows for the valve cap to be pressed securely in position. Priming is
achieved by depressing the nib while the pen is vertical. Flow-Seal products are
supplied with nib 381-600-PB.
Part ID: FV-0600
Materials: Polyethylene/ nylon/ polyester
Colour: Natural body/ white nib assembly/ white cap
Size: 1.5oz (44.35ml)
Length: 160mm (including cap)
Outer Diameter: 25mm Nib Width: 15mm Commodity Code: 39269097
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing almost
all assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
- Part ID: FV-0600
- Materials: Polyethylene body/ polypro assembly/ polyester blunt nib/ steel spring
- Colour: Black body/ white nib assembly/ white cap
- Size: 1.5oz (44.35ml)
- Body Diameter: 25mm
- Total Length: 160mm (including cap)
- Nib Width: 15mm
Items are shipped in the UK by DHL. For Europe deliveries, items are shipped via DHL or UPS. For all international shipments, items are sent DHL, UPS or FedEx.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Black body suitable for UV sensitive fluids
- Supplied ready to fill, assemble and use
- Includes 2 ball bearings to place inside body and shake to agitate certain liquids
- Priming is achieved by depressing the nib while the pen is vertical
- Valve prevents flooding and spattering
- No-clean flux, rma, solvents, lubricants, masking and water-based liquids
- Prevent evaporation of material
- Conform to current regulations for controlling substances capable of evaporation hazard
|
|
|
|
|
|
|
|
|