 |
 |
 |
|
Flow-Seal Pens & Bottles
Flow-seal environmental pens
and bottles channel controlled amounts of no-clean flux, rma, solvents,
lubricants, masking and water-based liquids. Flow-seal products prevent
evaporation of material and conform to current regulations for controlling
substances capable of evaporation hazard. A unique dispensing valve prevents
flooding and spattering, releasing material in controlled amounts to the nib
(tip).
The pen or bottle is in two
parts (cap and reservoir) and is easily assembled. The reservoir should be
filled with material to within 0.75" (19mm) of the top; this air chamber
allows for the valve cap to be pressed securely in position. Priming is
achieved by depressing the nib while the pen is vertical. Flow-Seal products are
supplied with nib 381-8425-AC. Pricing is for 1.
Part ID: FV-0400
Materials: Aluminium/ nylon/ acrylic
Colour: Silver body/ yellow nib assembly/ white cap
Size: 2oz (59.14 ml)
Length: 130mm (without cap)
Outer Diameter: 35mm
Commodity Code: 39269097
Pack Size: 1
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing almost
all assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
- Part ID: FV-0400
- Materials: aluminium/ felt
- Colour: Silver body/ yellow nib assembly/ black cap
- Size: 2oz (60ml)
- Length: 130mm (without cap)
- Outer Diameter: 35mm
Items are shipped in the UK by tracked courier.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Aluminium body
- ESD safe
- Supplied ready to fill, assemble and use
- Priming is achieved by depressing the nib while the bottle is vertical
- Valve prevents flooding and spattering
- No-clean flux, rma, solvents, lubricants, masking and water-based liquids
- Prevent evaporation of material
- Conform to current regulations for controlling substances capable of evaporation hazard
|
|
|
|
|
|
|
|
|
