|
|
|
|
Flow-Seal Pens & Bottles
Flow-seal environmental pens
and bottles channel controlled amounts of no-clean flux, rma, solvents,
lubricants, masking and water-based liquids. Flow-seal products prevent
evaporation of material and conform to current regulations for controlling
substances capable of evaporation hazard. A unique dispensing valve prevents
flooding and spattering, releasing material in controlled amounts to the nib
(tip). Pricing is for a pack of 10 pens.
The pen or bottle is in two
parts (cap and reservoir) and is easily assembled. The reservoir should be
filled with material to within 0.75" (19mm) of the top; this air chamber
allows for the valve cap to be pressed securely in position. Priming is
achieved by depressing the nib while the pen is vertical. Flow-Seal products are
supplied with nib 381-8425-AC.
Part ID: FV-0100-10
Materials: Polyethylene/ Nylon/ Acrylic
Colour: Natural body/ Yellow Nib Assembly/ White Cap
Volume: 10ml
Length: 130mm (without cap)
Outer Diameter: 13mm Commodity Code: 39269097 Pack Size: 10 Pen Assemblies
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing almost
all assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
- Part ID: FV-0100
- Materials: Polypropylene/ felt
- Colour: Clear body/ white nib assembly/ white cap
- Size: 10ml
- Length: 135mm (without cap)
- Outer Diameter: 13mm
Items are shipped by DHL tracked.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Clear body
- Supplied ready to fill, assemble and use
- Priming is achieved by depressing the nib while the pen is vertical
- Valve prevents flooding and spattering
- No-clean flux, rma, solvents, lubricants, masking and water-based liquids
- Prevent evaporation of material
- Conform to current regulations for controlling substances capable of evaporation hazard
|
|
|
|
|
|
|
|
|