High quality premium grade metal applicator. Syringe gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A robust and high quality made syringe dispensing gun for use with standard 55cc/ 55ml size syringe barrels. Ideal for low volume production, re-work or repair work where compressed air is not available.
Syringe barrel dispenser guns offer a solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. High torque 10:1 ratio leverage for effortless trigger movement. This gun features an adjustable switch to set trigger position.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 55ml gun is also available conveniently supplied complete with our full component barrel and tip kit.
Specifications:
Weight: 0.3kg
Gun Length: 175.0mm
Maximum Thrust: 2.5kN
Handle Material: Coated Steel
Frame Material: Coated Steel
Barrel Adapter: High Density Acetal
Tool Component Approvals: REACH
Cartridge Capacity: 55mL (55cc)
Mechanical Advantage Ratio: 10:1
Viscosity: Low/Medium/High
Standard Colour: Black
Warranty: 1 Year
Commodity Code: 90289090
This product is shipped with the following:
1 x 55cc clear barrel
1 x 55cc white wiper piston
1 x 55cc orange end cap
1 x orange tip cap
3 x 18 gauge tapered tip
Do not
use this product with Cyanoacrylate adhesives, rapid cure two-component
epoxies or aggressive solvents. Suitable materials proven to work with
this gun include solder pastes, solder fluxes, PVA glues, RTV's,
silicones, sealants, greases, SMT adhesives, pre-mixed and frozen
epoxies, single part epoxies, gels, adhesives, primers, inks and other
assembly fluids
.
Guns are portable and can be used in a factory production or assembly department as well as for repair and re-work. Guns are commonly used in the field for repair or maintenance applications. Common applications include:-
Deposits of solder paste
Deposits of solder flux
Grease to lubricate bearings
PVA glue to small furniture joints
RTV to seal cases
Silicone deposits and beads
Gasket sealant and silicone repair
Shots of roach insecticides
General adhesive application
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Materials: Steel/ Nylon
- Capacity: 55cc or 55ml
- Length: 175mm
- Height: 135mm
- Weight: 150 grams
- Colour: Black
- Warranty: 1 Year
This product is shipped with the following:
1 x 55cc clear barrel (part code AD955-N)
1 x 30cc/55cc white wiper piston (part code AD930-WW)
1 x 30cc/55cc red end cap (part code AD930-ECO)
1 x orange tip cap (part code AD900-ORTC)
3 x 18 gauge tapered tip (part code TTN18)
Order part code DG55-KIT if a full component kit is required. Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|
