Liquid Dispenser with Digital Timer, Vacuum Suck-back and LCD Display
The
ADL2800 is aan easy to use timed syringe dispenser. It�s light weight and
compact size makes this the ideal bench top dispensing solution for all
your gluing, solder paste application and most other materials viscous
or watery.
Features a super bright LCD timer, air pressure & vacuum pressure display. A teach
function allows the user to find a deposit size quickly without too much
adjustment. Its simplified construction and operation makes it easy for even someone
who has never used a dispenser before.
You hold the syringe like
a pen, adjust the air pressure to suit the liquid being dispensed then
press the foot pedal to apply. When the pedal is released, the
deposit instantly stops without drips or oozing. It is safe and simple
to use and reduces time spent manually applying liquids. T
he unit comes with three modes;
manual, timing and cycling. Features vacuum suck-back to prevent drips
of watery liquids
.
Supplied complete with (50) 30cc clear barrels, (50) wiper pistons, (50) end caps, (50) tip caps, (50) assorted tips,
(1) 30cc adapter assembly hose, (1) foot switch, (1) power cord, instruction guide and
manuals
. Covered by a 1 year warranty.
CE certified produc
t.
A choice of barrel sizes can be ordered with dispenser. We will ship size selected or 30cc if no selection made.
An adjustable vacuum
provides suck-back to the tip to prevent watery liquids from dripping.
We recommend the use of an inline filter on the air adapter to the
syringe when dispensing low viscosity fluids. The display shows the timer which can be adjusted for repeat deposits, down to micro-dots. This
compact dispenser sits on the bench and requires an air input from any
compressor or factory mains supply. It comes with airline hose and
fittings kit to make connection easy. Ready
to use out of the box.
Part ID: ADL2800
Timer: 0.001 - 99.99 seconds
Output Pressure: Up to 100 psi
Input Pressure: 80-100 psi
Size: 133 x 155 x 167mm
Weight: 2.65 kg
Input
Voltage: 220 V AC (110 VAC version optional)
Internal Voltage: 24 V DC
Consumed Power: <15W
Warranty: 1 Year
Cycle Rate: Up to 600 cycles/minute
Timing Repeatability: �0.0005%
Minimum Deposit Volume: 0.005ml
Meets or Exceeds: CE Approved
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
|
|
|
Applications
|
|
|
|
Dotting
|
|
Beading
|
|
Potting
|
|
Bonding
|
|
Sealing
|
|
Lubricating
|
|