Flexible dispensing bottles for applying most low to medium viscosity fluids, fluxes, adhesives, primers, henna inks, PVA glues and coatings. This kit contains bottle, luer lock cap, tip cap seal and 14 gauge smooth flow tapered tip.
Suitable for flux, solvents, adhesives, inks and solder mask. A low cost and simple dispensing solution for low viscosity liquids. Ten bottles and caps supplied in each bag ordered . Ships from stock.
Kit Includes:
1 x Bottle with Luer Lock Cap
1 x Orange Tip Cap Seal
1 x Smooth Flow Tapered Tip 14 Gauge 1.6mm ID
Commodity Code: 39269096
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- 240ml (240cc) or 8 oz capacity
- Low density polyethylene body/ nylon cap
- Natural colour body/ black cap
- Thread size 24-410 for cap
- Male luer lock cap
- Silicone-free
This bottle is non sterile. Bottles and caps are supplied in sealed packs with product label. All tips will attach to luer lock bottles by twisting on. Silicone-free means that the bottles will not contaminate any adhesive or fluid dispensed from them. Do not use this product with thick pastes, (consider our syringe guns). Typical fluids dispensed with these tips include glues, solvents, anaerobics, lubricants, gels, fluxes, epoxies, inks, PVAs, etc.
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
|
