Precision stainless steel burr-free tube to moulded
colour coded polypropylene hub with double-helix luer lock. Use this tip for
dispensing adhesives, solvents, glues, primers, activators and others. A 90 degree angle bent
stainless shaft length of 1". UV filter hub protects UV cure adhesives.
The AD needle series consist of a stainless-steel
shaft with a double helix polypropylene hub. This premier line of dispensing
needles is burr-free, and electro-polished shaft for unobstructed and
consistent material flow. Suitable for dispensing most fluids, adhesives and
solvents. Certified silicone-free, chloride-free and industrial grade safe for
use to 100 psi. Use these tips for applying most liquids for high precision
controlled dispensing.
Tips are colour coded for gauge size. The tip
features a tapered internal design where the shaft meets the hub to improve
fluid flow and reduce any restriction. This allows for a lower pressure to be
used for dispensing liquids and pastes.
Part ID: AD72810090-50
Gauge Size: 28
Materials: Polypropylene/ Stainless Steel
Hub Colour: White
Tube ID: 0.007 - 0.19 mm
Tube OD: 0.018" - 0.39 mm
Tube Length: 1.0" - 25.4 mm
Maximum Pressure: Up to 100 PSI
Details: Industrial Grade, Silicone Free
Commodity Code; 39174000
Brand: Adhesive Dispensing Ltd
Adhesive Dispensing Ltd provide a wide range
of equipment options for dispensing almost all assembly fluids - from watery
liquids, solvents, primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
- Part ID: AD72810090-50
- Gauge Size: 28
- Materials: Polypro/ Stainless Steel
- Hub Colour: White
- Tube ID: 0.007" - 0.19mm
- Tube OD: 0.018" - 0.39mm
- Tube Length: 1" - 25.4mm
- Maximum Pressure: Up to 100 PSI
- Details: Industrial grade, Silicone Free
General purpose tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. For Cyanoacrylate adhesives, we recommend using our Teflon, Teflon Lined or Polypro tips. For high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds, we suggest the use of our tapered tips.
All tips are safe for use up to 100 psi pressure. These tips are precision manufactured for industrial use. Tips are certified silicone-free components to ensure they do not contaminate any fluids or adhesives that are dispensed from them. Tips are shipped by tracked courier. Tracking codes are emailed once despatched.
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.
|
