Precision moulded 2.5" long standard nozzle x 1/16" (0.063") orifice. 1/4" NPT thread to fit single part dispensing cartridges and types of dispensing valves. Nozzle can be cut down if required.
If using with pre-filled sealant and silicone sealant cartridge tubes that feature an external nozzle thread, order reusable part TSD931-296 adapter fitting. This will provide a leak free connection to the range of nozzles direct from the silicone caulk tube. Natural high density polyethylene (HDPE) material. Supplied in sealed packs of 10.
Part ID: 5601391
Material: High Density Polyethylene (HDPE)
Colour: Natural
ID: 1/16" (1.59mm)
Length: 2.5" (63.5mm)
Connection: 1/4" NPT
Maximum Pressure: 100 PSI
Details: Industrial Grade, Silicone Free, Chloride Free
Commodity Code: 39173900
Pack Size: 10 Pieces
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Part ID: 5601391
- Material: Polyethylene
- Colour: Natural
- ID: 1/16" (1.59mm)
- Length: 2.5" (63.5mm)
- Connection: 1/4" NPT
- Details: Industrial grade, Silicone Free
Nozzles are designed to work with all industry standard industrial cartridges. Part TSD931-296 is required if using with pre-filled silicone and sealant tubes that feature and external thread nipple to cut. Nozzles are fully compatible with most fluids, adhesives, pastes and gels and useful for high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds.
All nozzles are safe for use up to 100 psi pressure. Nozzles are precision manufactured for industrial use. All nozzles are certified silicone-free to prevent contamination of any liquids dispensed from them.
|
