Precision moulded 4.5" long spreader nozzle x 3/4" wide x 1/8" (0.130") orifice. 1/4" NPT thread to fit all cartridges and some valves. Natural high density polypropylene material. Supplied in sealed packs of 1. Nozzles are designed to work with all industry standard industrial cartridges.
Part TSD931-296 is required if using with pre-filled silicone and sealant tubes that feature and external thread nipple to cut. Nozzles are fully compatible with most fluids, adhesives, pastes and gels and useful for high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds.
Part ID: 220586
Material: Polyethylene (MDPE)
Colour: Natural
Opening Size: 1/8" (3.3mm)
Width: 0.75" (19.05mm)
Length: 4.50" (114.3mm)
Connection: 1/4" NPT
Maximum Pressure: 100 PSI
Details: Industrial Grade, Silicone Free
Commodity Code: 39269097
Brand: PPG
Pack Size: 1
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Part ID: 220586
- Material: Polyethylene
- Colour: Natural
- Opening Size: 1/8" (3.3mm)
- Width: 0.75" (19.05mm)
- Length: 4.50" (114.3mm)
- Connection: 1/4" NPT
- Details: Industrial grade, Silicone Free
Nozzles are designed to work with all industry standard industrial cartridges. Part TSD931-296 is required if using with pre-filled silicone and sealant tubes that feature and external thread nipple to cut. Nozzles are fully compatible with most fluids, adhesives, pastes and gels and useful for high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds.
All nozzles are safe for use up to 100 psi pressure. Nozzles are not for medical use but are precision manufactured for industrial use. All nozzles are certified silicone-free to prevent contamination of any liquids dispensed from them.
|
