Blunt end aluminium needle tips
0.5" long in 18 gauge burr free precision tube. 0.033" ID, 0.050"
OD.
Precision aluminium hubs to burr-free
stainless steel shafts
. This tip suits the most
aggressive of fluids, chemicals, solvents and many adhesives and gels as the
hub to shaft is crimped and therefore solvents will not affect a glue bond.
Standard luer lock twist fit hub for attachment to all syringes or valves.
Supplied in a sealed box of 500 tips direct from stock.
Gauge size - 18
Tube Length - 0.50" - 12.70 mm
Inner Diameter - 0.033" - 0.84 mm
Outer Diameter - 0.050" - 1.27 mm
Hub: Aluminium
Cannula: Stainless Steel
Rating - Safe for use to 100 psi
Colour - Silver
Details - Silicone Free
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing almost
all assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
- Gauge size - 18
- Tube Length - 0.50" - 12.70 mm Inner Diameter - 0.047" - 0.84 mm Outer Diameter - 0.050" - 1.27 mm
- Rating - Safe for use to 100 psi
- Colour - Silver
- Details - Silicone Free
This tip is not for medical use. Tips are supplied in sealed packs with product label. Aluminium tips will attach to luer lock and luer slip type syringes. Twist on the tip for luer lock and push on for luer slip. A shorter tip such as this will reduce the possibilities of drips. Silicone-free means that the tips will not contaminate any adhesive or fluid dispensed from them. Do not use this tip with Cyanoacrylate adhesives, (consider our Teflon Lined or Teflon tips for CAs). Typical fluids dispensed with these tips include glues, solvents, chemicals, pastes, gels, fluxes, epoxies, inks, PVAs, etc.
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
|
