The TES Series dispensing tips offer a variety of dispensing performance and flexibility options. Stainless steel tubing is cut to precise lengths and ground to be burr-free. Cut tubing is crimped into aluminium locking insert, then moulded into polypropylene hubs. Moulded hub colours correspond to gauge size.

All TES Series tips secure to syringe barrels and correspond to the luer lock specification. Tips are colour coded for gauge size. The tip uses a slightly tapered internal design where the shaft joins the hub to ease fluid flow and reduce restriction. This allows for a lower pressure to be used for dispensing liquids and pastes. Crimped tips are ideal for use with solvents as the bond between plastic hub & steel tube is crimped, not glued.

Part ID: TES18-1
Materials: Polypropylene/ Stainless Steel Hub
Colour: Green
Inner Diameter: 0.033" - 0.84 mm
Outer Diameter: 0.050" - 1.27 mm
Tube Length:1.0 0" - 25.4mm Tip
Details: Industrial Grade, Silicone Free, Chloride Free
Commodity Code: 90289090
Brand: Adhesive Dispensing Ltd

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: TES18-1
• Materials: Polypropylene Hub/ Stainless Steel Tube Colour: Green
• Inner Diameter: 0.033" - 0.84 mm
• Outer Diameter: 0.050" - 1.27 mm
• Tube Length: 1.0" - 25.4 mm
• Tip Details: Industrial Grade, Silicone Free

General purpose TES tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. For Cyanoacrylate adhesives, we recommend using our Teflon, Teflon Lined or Polypro tips. For high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds, we suggest the use of our tapered tips. General purpose TES tips are safe for use up to 100 psi pressure. These Tips are not for use on people or animals but are precision manufactured for industrial use. General purpose TES tips are certified silicone-free components and will not contaminate any fluids that are dispensed from them.


Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.