Cartridge reservoir in high density polyethylene with wiper plunger in a kit of 250 x TS120C cartridges and 250 x TS1PB plungers. 12 ounce/ 355cc ml size. Suitable for handling most materials including solvent based fluids. 1.69" outer diameter by 12.25" long. Suitable for use in cartridge guns or pressurised cartridge retainers and caps.
Cartridges feature a 1/4" NPT (6mm) female thread dispensing orifice for secure attachment of nozzles or 1/4" threaded fittings. Pack includes 250 pcs of the cartridge and 250 pcs of the plunger. This kit is pre-plunged. The plunger is pre-inserted in the cartridge ready for filling.
Part ID: TS120CPB-250
Material: High Density Polyethylene (HDPE)
Cartridge Colour: Natural
Plunger Colour: Black
Cartridge Capacity: 12oz (355cc or 355ml)
Length: 12.25" (311.15mm)
Outer Diameter: 1.69" (42.92mm)
Thread Nozzle Outlet: 1/4" NPT
Maximum Pressure: 100 psi
Details: Industrial Grade Safe, Silicone Free
Commodity Code: 39269097
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Part ID: TS120CPB-250
- Material: High Density Polyethylene/ Low Density Plunger
- Colour: Black (natural) cartridge and plunger
- Cartridge Capacity: 12oz (355cc)
- Cartridge Length: 12.25"
- Cartridge OD: 1.69"
- Details: Industrial Grade Safe, Silicone Free
Cartridges are designed for use with pneumatic dispensing equipment or manual guns. They are thick walled and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper plunger inside moves down without restriction to improve dispense performance.
Use these cartridges with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have 1/4" NPT end for screw on nozzle attachment. These products are safe for use up to 100 psi pressure. Barrels are not for medical use but are precision manufactured for industrial applications.
Components are certified silicone-free components and will not contaminate any fluids that are dispensed from them.
|
