G10 High Temperature Gasket Maker 50ml
Product Code: G10
Price: £12.00
Description
G10 is designed for the sealing of gaskets. The product is a single component anaerobic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces. It seals close fitting joints between flanges and fixed metal faces and will flex with minor movement from the flange.
G10 is used as form-in-place gasket for applications on pumps, compressors, axle covers and transmission housing.
This adhesive can be applied using our syringe barrel dispensers or direct from the large bottles using our metering valves, controller and pressure pot. All adhesives are shipped with TDS and MSDS.Technical Data Sheet (TDS)
Material Safety Data Sheet (MSDS)
Part ID: G10
Resin: Methacrylate Ester
Bottle Size: 50 ml, 250 ml LDPE bottles
Colour: Red
Viscosity: 3,000 cps
Max Gap Fill: 0.5 mm
Temp. Range: - 54 to 200 C
Sealing Time: 60 - 120 minutes @ 20 C
Full Cure Time: 24 hours @ 20 C
Shear Strength: 8 Nm
Features
- High strength, high viscosity retaining compound