VC-1195A 4-way Valve Controller Adhesive Dispensing Ltd

Description

The VC-1195N Dispensing Valve Controller is designed to provide a faster cycle for any valve that has a secondary air input line. The second air line will snap the valve closed faster than with an internal spring closing system. This will allow for a higher cycle rate and reduce the amount of material that trapped in the valve after dispensing.

The VC-1195N is a 4-way dispensing valve controller that can be used to control one or two dispensing valves with dual air ports for 4 way pneumatic operation simultaneously. The secondary air input will close a valve faster than using the valve's internal return spring, providing an increase in speed and suck-back. Use this controller for air open/ air close type dispensing valves. This version works with voltage 100 - 240V AC so can be used globally.

This system uses a highly responsive air pressure management system, coupled with a digital timing circuit and display, to provide consistent, repeatable control over all types of valves. Use this controller for all double acting dispense valves.

Timer: Adjustable from 0.01-30 seconds
Cycle initiation: Manual or Timed
Repeat tolerance: 0.1%
Internal voltage: 24VDC
External voltage: 220VAC
Air input: 70-100 psi (5 - 7 bar)
Air output: 1-100 psi (0.1-7 bar)
Size: 10.50" x 8.25" x 2.75" (26.67 x 20.95 x 6.98cm)
Weight: 4lbs 3oz ( 1.90kg)
Commodity Code: 90289090
Approvals: CE
Warranty: 1 Year

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

Features

Improves a valve's operational speed and suck-back
Increases shot size accuracy
Simultaneous control of two valves
Timing interval from 0.01 to 31 seconds
Fast response internal pneumatic solenoid

4 Way Valve Controller Model VC1195N

4 Way Valve Controller Model VC1195N