Hand Lever Diaphragm Valve ADL-200CAM
Product Code: ADL-200CAM
Price: £395.00
Description
The ADL-200CAM hand held diaphragm valve provides precise and continuous micro shot applications
for a number of fluids. This low cost hand held valve is excellent for most low to medium viscosity fluids. The gentle hand lever will open the diaphragm
thus allowing fluids to flow accurately; when the lever is released the diaphragm
will go back to the closed position and flow stops.
This manual valve doesn't require the use of a time/pressure dispenser. The control is by lever action alone. An adjustable screw changes the stroke for increased or decreased fluid flow. Typical fluids dispensed with this valve include Cyanoacrylate adhesives, solvents, primers, activators, inks, paints, UV cureable adhesives and many others. Do not use this valve for two-part epoxies or thick pastes.
We supply the valve boxed with a fluid input fitting (which quick connects by luer lock twist-on/off attachment to the fluid line) as well as a luer lock tip adapter. When the tip is removed after use, a cap is provided to seal off the end of the valve.
You can feed adhesive to this valve from any of our pressure pots. From the small 500 gram (0.5 litre) to the large 19 litre vessel. The valve remains closed until the lever is pressed so does not require a high pressure feed.
Part ID: ADL-200CAM
Size: 159mm L x 45mm Diameter
Weight: 156 g
Wetted Parts: Delrin, Teflon
Viscosity Range: 1 - 5,000 CPS
Flow Rate: 1250ml/minute @ 60 psi
Max Fluid Pressure: 50 psi
Material Inlet: 1/8"
Material Outlet: 5/16-28"
Valve Mounting: n/a
Colour: Black
Warranty: 1 Year
Commodity Code: 90289090
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
This manual valve doesn't require the use of a time/pressure dispenser. The control is by lever action alone. An adjustable screw changes the stroke for increased or decreased fluid flow. Typical fluids dispensed with this valve include Cyanoacrylate adhesives, solvents, primers, activators, inks, paints, UV cureable adhesives and many others. Do not use this valve for two-part epoxies or thick pastes.
We supply the valve boxed with a fluid input fitting (which quick connects by luer lock twist-on/off attachment to the fluid line) as well as a luer lock tip adapter. When the tip is removed after use, a cap is provided to seal off the end of the valve.
You can feed adhesive to this valve from any of our pressure pots. From the small 500 gram (0.5 litre) to the large 19 litre vessel. The valve remains closed until the lever is pressed so does not require a high pressure feed.
Part ID: ADL-200CAM
Size: 159mm L x 45mm Diameter
Weight: 156 g
Wetted Parts: Delrin, Teflon
Viscosity Range: 1 - 5,000 CPS
Flow Rate: 1250ml/minute @ 60 psi
Max Fluid Pressure: 50 psi
Material Inlet: 1/8"
Material Outlet: 5/16-28"
Valve Mounting: n/a
Colour: Black
Warranty: 1 Year
Commodity Code: 90289090
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
Features
- Ideal for cyanoacrylates, UV cure and anaerobics
- Low cost dispensing solution supplied complete
- Controlled deposits, lines or potting of most liquids
- Syringe feed, cartridge feed or pressure pot
- Supplied with pinch tubes, fluid lines and tip kit
- Hand operated
- 1 Year Warranty