Air Operated Needle Valve S/S TS5420SS
Product Code: TS5420SS
Price: £1,115.00
Description
A precision dosing valve that uses a needle assembly to dispense precise dots or very fine beads of low to medium viscosity fluids such as activators, inks, gels, solvents, lubricants, chemicals and UV's. Needle seal at tip end prevents dead space for very fast shut off when dispensing micro dots without drips.
Suited to repeat deposits, controlled lines or potting and can be operator controlled or linked to an automated assembly process. This needle valve is designed to apply micro shots without drips. The valve design is vertical with fluid flow from the side either by syringe, cartridge or fluid line feed (from pressure pot). Always use black fluid lines or feed tubing when dispensing UV cure adhesives.
All valves are shipped with a luer lock fluid elbow fitting, airline hose with male quick connect, mounting attachment, tip cap end seal, selection of dispensing tips and user guide. Valves are supplied with a 1 Year warranty. Do not use this valve for reactive adhesives and fluids such as Cyanoacrylates. * Product has been made obsolete. Please use TS5440 version.
Part ID: TS5420SS
Wetted Materials: 303 Stainless Steel, Teflon Seals
Size: 111.8mm L x 28.5mm
Diameter Weight: 4.8oz
Viscosity Range: 1 - 100,000 CPS
Repeatability: +/- 0.30%
Cycle Rate: Up to 500 cycles/ minute
Flow Rate (water): 900ml/minute @ 100 psi
Min Shot Size: 0.003 cc/ ml
Max Fluid Pressure: 300 psi (21 Bar)
Activation Pressure: 70 psi (4.8 bar) minimum
Material Inlet: 1/8" NPT
Material Outlet: Male Luer Lock
Mounting: 1/4" 20UNC-2B
Warranty: 1 Year
Commodity Code: 90289090
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
Suited to repeat deposits, controlled lines or potting and can be operator controlled or linked to an automated assembly process. This needle valve is designed to apply micro shots without drips. The valve design is vertical with fluid flow from the side either by syringe, cartridge or fluid line feed (from pressure pot). Always use black fluid lines or feed tubing when dispensing UV cure adhesives.
All valves are shipped with a luer lock fluid elbow fitting, airline hose with male quick connect, mounting attachment, tip cap end seal, selection of dispensing tips and user guide. Valves are supplied with a 1 Year warranty. Do not use this valve for reactive adhesives and fluids such as Cyanoacrylates. * Product has been made obsolete. Please use TS5440 version.
Part ID: TS5420SS
Wetted Materials: 303 Stainless Steel, Teflon Seals
Size: 111.8mm L x 28.5mm
Diameter Weight: 4.8oz
Viscosity Range: 1 - 100,000 CPS
Repeatability: +/- 0.30%
Cycle Rate: Up to 500 cycles/ minute
Flow Rate (water): 900ml/minute @ 100 psi
Min Shot Size: 0.003 cc/ ml
Max Fluid Pressure: 300 psi (21 Bar)
Activation Pressure: 70 psi (4.8 bar) minimum
Material Inlet: 1/8" NPT
Material Outlet: Male Luer Lock
Mounting: 1/4" 20UNC-2B
Warranty: 1 Year
Commodity Code: 90289090
Features
- Ideal for UV cure, solvents,
- Fast positive shut off for micro dots
- Zero dead fluid volume
- Repeat deposits, lines or potting
- Adjustable stroke control for fine tuning
- Syringe feed, cartridge or pressure pot
- Supplied with input fitting, fluid lines and tip kit
- Easy bench mount, machine mount or robot mount
- Simple to control using TS500R, TS250 or TS350