Hand Lever UHMW Diaphragm Valve TS5623HU
Product Code: TS5623HU
Price: £1,451.00
Description
The TS5600 Series dispense valves accurately control the application
of most low to medium viscosity fluids without drips. The unique seal-less
design incorporates an inert polymer diaphragm that isolates the actuator from
the valve. The adjustable open/close stroke 0.13 to 0.64 mm (0.005" to
0.025") allows for a fast response with positive shutoff. Wetted
components are made of inert plastics.
Takes a direct feed from any pressure pot, cartridge or syringe and includes a selection of flexible fluid line tubing and connectors. Model TS5623HU with UHMW* polymer wetted parts is used for dispensing solvents, cyanoacrylates, anaerobics and fluxes. Use the Delrin version for UV cure adhesives. This version is a manual hand held valve (non-timed) that will accept a direct feed of adhesive or liquid from a pressure pot.
Part ID: TS5623HU
Adhesive Dispensing Ltd provide a wide range of
equipment options for dispensing almost all assembly fluids - from watery
liquids, solvents, primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
Takes a direct feed from any pressure pot, cartridge or syringe and includes a selection of flexible fluid line tubing and connectors. Model TS5623HU with UHMW* polymer wetted parts is used for dispensing solvents, cyanoacrylates, anaerobics and fluxes. Use the Delrin version for UV cure adhesives. This version is a manual hand held valve (non-timed) that will accept a direct feed of adhesive or liquid from a pressure pot.
Part ID: TS5623HU
Wetted Materials: UHMW, PTFE
Size: 88mm L x 27mm Diameter
Weight: 118g (0.26lb)
Viscosity Range: 1 - 50,000 CPS
Flow Rate (water): 7250ml/minute @ 100 psi
Max Fluid Pressure: 70 psi ( 5 Bar)
Material Inlet: 1/8" NPT
Material Outlet: 1/4-28 UNF
Warranty: 1 Year
Commodity Code: 84248940
Features
- Ideal for cyanoacrylates and primers
- High precision solution supplied complete
- Repeat dots, lines or potting of most liquids
- Adjustable stroke control for fine tuning of flow
- Syringe feed, cartridge feed or pressure pot
- Supplied with fluid lines and tip kit
- Easy bench mount, machine mount or robot mount
- Simple to control using TS500R, TS250 or TS350