Maximum Strength Retainer 50ml A18
Product Code: A18
Price: £10.00
Description
A18 is designed for the bonding of cylindrical fitting parts, particularly where bond gap can approach 0.25mm. The product is a single component anaerobic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.
A18 is a high strength medium viscosity retaining compound, designed to bond close fitting metal surfaces with an ultimate structural strength. A18 specialises in bonding cylindrical fitting parts, and maintains an unfaltering bond under all levels of cyclic load stress distribution.
This industrial grade adhesive can be used in a wide variety of applications, especially interference or press fit parts including permanent retention of bearings, gears, pulleys, fans, couplings, cams, locking of key and spines, bonding rotors, bushes and sleeves to shafts, securing loose or worn parts. This adhesive can be applied using our syringe barrel dispensers or direct from the large bottles using our metering valves, controller and pressure pot. All adhesives are shipped with TDS and MSDS.
Technical Data Sheet (TDS)
Material Safety Data Sheet (MSDS)
Part ID: A18
Resin: Dimethacrylate
Bottle Size: 50 ml LDPE bottles
Colour: Green
Viscosity: 2100 to 2900 cps
Max Gap Fill: 0.38 mm
Temp. Range: - 50 to 150 C
Fixture Speed: 10 - 15 minutes @ 22 C
Full Cure Time: 24 hours @ 20 C
Shear Strength: > 3500 psi (>25Nmm2)
A18 is a high strength medium viscosity retaining compound, designed to bond close fitting metal surfaces with an ultimate structural strength. A18 specialises in bonding cylindrical fitting parts, and maintains an unfaltering bond under all levels of cyclic load stress distribution.
This industrial grade adhesive can be used in a wide variety of applications, especially interference or press fit parts including permanent retention of bearings, gears, pulleys, fans, couplings, cams, locking of key and spines, bonding rotors, bushes and sleeves to shafts, securing loose or worn parts. This adhesive can be applied using our syringe barrel dispensers or direct from the large bottles using our metering valves, controller and pressure pot. All adhesives are shipped with TDS and MSDS.
Technical Data Sheet (TDS)
Material Safety Data Sheet (MSDS)
Part ID: A18
Resin: Dimethacrylate
Bottle Size: 50 ml LDPE bottles
Colour: Green
Viscosity: 2100 to 2900 cps
Max Gap Fill: 0.38 mm
Temp. Range: - 50 to 150 C
Fixture Speed: 10 - 15 minutes @ 22 C
Full Cure Time: 24 hours @ 20 C
Shear Strength: > 3500 psi (>25Nmm2)
Features
- High strength medium viscosity retaining compound