Liquid Dispenser with Timer, Teach Mode, Vacuum Suck-back and Memory
The
TS350 system will dispense virtually any assembly fluid and adhesive or
liquid paste, from thin, watery liquids and solvents to thick gels,
silicones and brazing pastes. All are applied quickly, very accurately
and with zero waste, hand fatigue or mess.
This is a system available with 0-100 psi adjustable air regulator for
most fluids and pastes or with a 0-15 psi regulator for watery liquids,
cyanoacrylates and solvents.
You hold the syringe like a pen, adjust the
air pressure to suit your liquid being dispensed and press the foot
pedal to dispense. When the foot pedal is released, the deposit
instantly stops without drips or oozing. It is safe and simple to use
and reduces time spent manually applying liquids.
The TS350 range offer high precision control over watery liquids to
thick pastes in a compact bench top system.
The TS350 has a bright LCD
screen that displays time, vacuum, air pressure, time memory storage (up
to 10) and shot counter. These high quality precision dispensers will
make micro dots, large dots and controlled lines of almost any adhesive,
paste, gel, epoxy and compound. Syringe sizes available range from 3cc
to 55cc. Use supplied foot pedal or optional finger switch.
The TS350
features memory storage for up to 10 time settings, teach mode to reduce
setup time and dual air output. A sophisticated bench dispenser to
handle most adhesives and liquids.
This compact dispenser sits on the bench and requires an air input from a
compressor or factory mains supply. It comes with airline hose and
fittings kit to make connection easy. It will work with any power supply
and comes supplied with plugs for use in most countries.
Includes a
syringe stand, 10cc syringe and piston pack and tip kit selection.
Timer: 0.008 to 60 seconds
Output Pressure: Up to 100 psi (or 0-15 psi version)
Input Pressure: 80-100 psi
Size: 152 x 165 x 178mm
Weight: 1.2kg (2.6lb)
Input Voltage: 100-240 V AC
Warranty: 1 Year
Cycle Rate: Up to 1200 cycles/minute
Timing Tolerances: +/- 0.001%
Meets or Exceeds: CE, TUV-GS, NRTL
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
|
Applications
Dotting
Beading
Potting
Bonding
Sealing
Lubricating
|
