Join our mailing list!



Knowledge Base:  

You are here: Knowledge Base : pressure pot
Page of 4
Typical dual Pinch Valve dispensing system from 500 gram Pressure Pot with digital controller
Typical dual Pinch Valve dispensing system from 500 gram Pressure Pot with digital controller
TS1201 Pinch Valve Pen application with material supplied from TS1215 pressure pot
TS1201 Pinch Valve Pen application with material supplied from TS1215 pressure pot Can also be any pressure pot if required
TS5622VU diaphragm valves (4) controlled by TS500R controllers (4) supplied by pressure pot
TS5622VU diaphragm valves (4) controlled by TS500R valve controllers 4) supplied by pressure pot For micro shots or beads of most low to medium viscosity liquids
TS1212 valve supplied by TS125 pressure pot controlled by TS250 dispenser
TS1212 valve supplied by TS125 pressure pot controlled by TS250 dispenser For micro shots or beads of most low to medium viscosity liquids
TS1201 (2) pen valves supplied from pressure pot divided by liquid manifold
TS1201 (2) pen valves supplied from pressure pot divided by liquid manifold For beads of most low to medium viscosity liquids
TS5622VU CA dispense valve dispense system fed by TS1215 pressure pot with TS350 controller
CA TS5622VU valve dispense system fed by 500g pressure pot with TS350 controller For low to medium viscosity fluids including Cyanoacrylate adhesives
Dual TS1212 valve dispensing station controlled by TS500R fed from TS1265 pressure pot
Dual TS1212 valve dispensing station controlled by TS500R fed from TS1265 pressure pot Large tank unit to feed dual valves for rapid deposits of most low to medium viscosity fluids
TS1201 dispense pen application fed from a 2 gal pressure Pot.
TS1201 dispense pen application fed from a 2 gal pressure Pot. Non-timed hand lever valve fed by large pressure pot with adjustable regulator and gauge
4 station dispense system using TS1201 pens fed from 1 gallon pressure pot
4 station dispense system using TS1201 pens fed from 1 gallon pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot
2 station dispense system using TS1201 pens fed from 500gram pressure pot
2 station dispense system using TS1201 pens fed from 500 gram pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot This setup allows fluid to be dispen
TS5622VU diaphragm valve system controlled by a TS250 dispenser fed by pressure pot.
TS5622VU diaphragm valve system controlled by a TS250 dispenser fed by pressure pot. Timed dispensing system for rapid dots or beads of most low to medium viscosity liquids and glues
TS5420 needle valve system controlled by a TS250 dispenser fed by TS1258 pressure pot
TS5420 needle valve system controlled by a TS250 dispenser fed by TS1258 pressure pot Timed dispensing system for rapid dots or beads of most low to medium viscosity liquids and glues
Dual TS1201 disposable material path pen application supplied from TS1251 pressure pot
Dual TS1201 disposable material path pen application supplied from TS1251 pressure pot Manual operated pinch tube pen valves run from a liquid manifold with adhesive in a tank with regulator.
TS5420 needle valve system controlled by a TS250 dispenser fed by pressure pot
TS5420 needle valve system controlled by a TS250 dispenser fed by pressure pot Adjustable needle valve for micro deposits of fluids from a large pressure pot using a digital timed controller unit.
6 TS1212 valve system controlled by a TS350 dispenser fed by a TS1255 pressure pot
6 TS1212 valve system controlled by a TS350 dispenser fed by a TS1255 pressure pot Dispense system for low to medium viscosity fluids to a 6 head valve making simultaneous deposits
Spray Valve set-up using 6 TS5520 controlled by 6 TS500R fed from a TS1258 pressure pot
Spray Valve set-up using 6 TS5520 controlled by 6 TS500R fed from a TS1258 pressure pot Bench mounted timed dispense system for any size syringe barrels making dots or beads
Spray Valve set-up using 2 TS5520 controlled by 2 TS500R fed from a TS1258 pressure pot
Spray Valve set-up using 2 TS5520 controlled by 2 TS500R fed from a TS1258 pressure pot Bench mounted timed dispense system for any size syringe barrels making dots or beads
Dual TS5322 spool valves from TS1215 pressure pot controlled by TS350
Dual TS5322 spool valves from TS1215 pressure pot controlled by TS350 Spool valves for rapid deposits of most liquids with snuff-back to prevent drips
TS5420 needle valve fed from TS1258 pressure pot controlled by TS350
TS5420 needle valve fed from TS1258 pressure pot controlled by TS350 Needle valve handles most low to medium viscosity liquids for micro dots to controlled beads
TS1212 syringe fill system for UV adhesives fed by a TS1215 pressure pot controlled by a TS250
TS1212 syringe fill system for UV adhesives fed by a TS1215 pressure pot controlled by a TS250 Low pressure syringe filler for adhesive direct from bottles