TS5440 Needle Valve Ink Circles
|
TE730025 30GA Tip 0.25" Long Ink Dot Test
|
TS250 dispenser training guide and setting up
A New Dimension to Bench-top Fluid Dispensing
P RODUCTIVITY-ENHANCING DIGITAL DISPENSERS/ CONTROLLERS FROM
ADHESIVE DISPENSING LTD
T S 2 5 0 Seri |
Semco cartridge to ADL conversion
Find the equivalent ADL part to the Semco cartridge. With links to the product page and pricing. All ADL parts are compatible. Semco Part Code Sizes &n |
7015LLPK Orange Colour Tip Cap Seal Luer Lock
7015LLPK Orange Colour Tip Cap Seal Luer Lock
Product Description
Part
7015LLPK is a tip cap seal made from polypropylene that will seal the end of
a syringe b |
Epoxy Definition
Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t |
TSR2201 Robot Dispenser Ink Dot Test
|
Basic TS250/ TS255 bench dispensers manual applications
The TS250/ TS255 basic dispensers provide tremendous application solutions beyond the traditional industries for dispensing (such as automotive, electronics, computer, medical device makers, etc). Th |
Doming Resins
|
12oz 100A-12 Pneumatic Cartridge Gun
Product
Description
The 100A-12
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 12oz Techcon, EFD and Semco cartrid |
6oz 100A-60 Pneumatic Cartridge Gun
Product
Description
The 100A-60
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 6oz Techcon, EFD and Semco cartridg |
2.5oz 100A-25 Pneumatic Cartridge Gun
Product
Description
The 100A-25
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 2.5oz Techcon and Semco cartridges. |
8oz 100A-80 Pneumatic Cartridge Gun
Product
Description
The 100A-80
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 8oz Techcon and Semco cartridges. I |
2 station dispense system using TS1201 pens fed from 500gram pressure pot
2 station dispense system using TS1201 pens fed from 500 gram pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot This
setup allows fluid to be dispen |
Dispense station using the TS5420 fed from a TS1215 controlled by a TS250
Dispense station using the TS5420 fed from a TS1215 controlled by a TS250 Simple single head dosing system for inks, solvents, UV cure, oils and other low to medium viscosity fluids. |
TS5420 needle valve system controlled by a TS350 fed by TS1258
TS5420 needle valve system controlled by a TS350 fed by TS1258 Simple single head dosing system for inks, solvents, UV cure, oils and other low to medium viscosity fluids. |
Application guide - conformal coating spray valve to PCB (printed circuit boards)
Application guide - conformal coating spray valve to PCB (printed circuit boards)
Customers applying conformal coating material onto the surface of an assembled |
Application guide - solder paste dispensing automated assembly high speed
Application guide - solder paste dispensing automated assembly high speed
Customers applying solder pastes as part of an automated assembly process where accurac |
Application guide - beads of Cyanoacrylate adhesives from 500 gram bottles
Application guide - beads of Cyanoacrylate adhesives from 500 gram bottles
Customers applying controlled beads of Cyanoacrylate (CA) glues and adhesives direct f |
Application guide - liquid filling of vials and bottles
Application guide - liquid filling of vials, bottles and containers using valve system
Customers filling glass or plastic vials, bottles, containers, etc with li |
