HotMelt Definition HotMelt - A
thermoplastic material that is melted in dispensing equipment and is
applied in a molten state. It then wets the substrate surface and as it
cools, it solidifies forming a bond. Ve
Epoxy Definition Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t
Some typical dispensing applications Automotive Seal headlight assemblies with RTV Spray marking inks Grease electrical connector pins Apply brazing paste to air conditioners Apply stop-off for plating operations Spray oil to lubricate
Anaerobic Definition Anaerobic - A
one-part adhesive/sealant that cures only in the absence of air.
Designed for locking screws, nuts, bolts and/or retaining bearings,
shafts, etc. A single part adhesive. Supplied
Braze Paste Definition Braze Paste - A paste or flux material. For alloys that melt above 425 deg c. Easily applied using air-powered syringe dispenser.
Caulk Definition Caulk - Uusally a sealant or silicone used to fill gaps as well as describing the process of gap filling.
Data Sheet (SDS) for EP95 Quick Set Epoxy Resin Technical Data Sheet (TDS) for EP95-50 Epoxy Resin Click here for safety data sheet. Click here for product web page. Any questions, please contact us. Adhesive Dispensing Ltd provide a wide range of
