VBE400MR 2K Battery Dispensing Gun
|
VBE400MR 400ml 2K Aerospace Sealant Dispenser Gun TDS
Data Sheet for model VBE400MR - 600ml Battery Cartridge Dispenser Data Sheet Details here |
Epoxy Definition
Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t |
ADCBA 2K Dispenser Gun Explained
|
Dilatent Definition
Dilatent - A liquid where viscosity (thickness) increases with shearing rate (when you stir it). Dilatent is the opposite of Thixatropic.
|
Accelerator Definition
Accelerator - A fluid used to speed up material curing Usually a low viscosity single part liquid. Sometimes supplied as an aerosol, in a can or in a bottle with a brush.
|
Acrylic Definition
Acrylic - A
structural adhesive capable of bonding a broad range of substrates
including most types of plastics and metals both minimally prepared and
unprepared. Two-part catalyst cure or one |
Anaerobic Definition
Anaerobic - A
one-part adhesive/sealant that cures only in the absence of air.
Designed for locking screws, nuts, bolts and/or retaining bearings,
shafts, etc. A single part adhesive. Supplied |
Aqueous Definition
Aqueous - Meaning water based fluid or containing water. Common glues including PVA, wood or paper glue. Easily dispensed with manual or air-powered dispensers.
|
Braze Paste Definition
Braze Paste - A paste or flux material. For alloys that melt above 425 deg c. Easily applied using air-powered syringe dispenser.
|
Caulk Definition
Caulk - Uusally a sealant or silicone used to fill gaps as well as describing the process of gap filling.
|
Centipoise Definition
Centipoise - Normally
written as cps, this is a way of measuring the viscosity (thickness) of
a product. The higher the number, the thicker the fluid. 100cps = 1
POISE. 1 cp = 1 mPas.
|
Conductive Epoxy Definition
Conductive Epoxy - A
term used with fluids that will conduct electricity. These materials
often come pre-packed in dispensing barrels or cartridges.
|
Cyanoacrylate Definition
Cyanoacrylate - A
one-part adhesive that cures instantly on contact with mated surfaces.
High strength, excellent adhesion to a wide variety of substrates.
Cyanoacrylates are available in a var |
Hot Melt Definition
Hot Melt - A
thermoplastic material that is melted in dispensing equipment and is
applied in a molten state. It then wets the substrate surface and as it
cools, it solidifies forming a bond. Ve |
Polyurethane Definition
Polyurethane - One
or two-part urethane adhesives provide superior bonds with minimal
surface preparation for today's high performance thermo sets and
thermoplastics. They provide excellent fle |
Silicone Definition
Silicone - One-component
adhesive/sealant that cures to a tough rubbery solid upon exposure to
moisture in the air. Silicone has good resistance to weathering,
vibration, moisture and chemicals |
White paste test 2
|
231218 20oz Aerospace Sealant Cartridge Dispenser Gun TDS
Data Sheet for model 231218 - 20 Ounce Cartridge Dispenser Data Sheet Details here |
310ml Euro Cartridge Accessories
310ml Euro Cartridge Accessories Details here |
