30 Minute Epoxy is a slow-setting, clear epoxy adhesive, that can bond a variety of materials in many applications. Can be used to bond and seal metal/metal alloys, casting impregnations and potting systems, gap filling, cracks in castings, hole repair, tools, ornaments, knobs, ceramic, glassware, fibre glass repair etc.
Must be applied with use of 1:1 applicator gun (available on this website) and supplied static mixing nozzle (50ml cartridge only) for a more consistent and controlled application.
Product Overview
- Two-part, ultra-clear epoxy adhesive
- Approximately 30 min fixture time
- Temperature resistance -50 c - 80 c
- 50ml 1:1 Ratio (cartridge)
Twinpack 50ml 30 Minute Epoxy Multi Purpose Adhesive. Includes the follow parts: -
1 x 50ml Epoxy Cartridge Tube 1:1 Ratio
5 x 50ml MAQ 50-24L Mixer Nozzles
Part ID: EP30-50
Material: Epoxy Adhesive
Colour: Clear Translucent
Pack Size: 50ml Dual Cartridge
Mix Ratio: 1:1 by volume
Applications: Use with plastics and metals
Open Time (at 23 C): 10 to 12 minutes
Full Cure Time: 30 minutes
Viscosity: 5000 cps
Shelf Life: 12 months (Storage at 5 C)
Do not freeze this product, keep away from direct sunlight.
How to Use
Surfaces should be clean, dry and free from oil and grease.
Apply to both surfaces and mate parts together. Hold or clamp for approximately 30 minutes.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.