Join our mailing list!




  Home > Adhesives > Epoxy Resins >

White PU Caravan Repair Resin 50ml AD6001
PU Caravan Plastic Repair 50ml
PU Rigid Plastic Repair


 
Price: £10.48 Exc VAT

Availability:: Usually Ships in 24 to 72 Hours
Product Code: AD6001
Qty:

Description Technical Specs More Information
 
AD6001 is a two component, room temperature curing, white coloured, odourless, thixotropic polyurethane adhesive mainly oriented to auto body shop and makes possible fast and easy repairs on most of the damage to plastic parts.
PRODUCT BENEFITS:
Fast hardening time
Excellent grinding properties
High strength
Easy to apply
Over pain table
No marking through
Suitable for many different materials

AREA OF APPLICATION: AD6001 is used to repair plastic parts like shower trays, lights, side panels, blinkers, side protection, etc. whenever plastic parts are damaged. Suitable substrates are: all thermosetting plastics and most of all thermoplastic such as ABS, PC, PA, PPO, PP, PP+EPDM, SAN. AD6001 also has very good adhesion on many different material as metal, wood, concrete, ceramics and glass.
PROCESSING: The strength and durability of bonded joints are dependant on proper pre-treatment of the surfaces to be bonded. At the very least, joint surfaces should be cleaned with a good degreasing agent in order to remove all traces of dust, dirt, oil and grease. Pre-treatment of thermoplastics materials such as PVC, polycarbonate, polypropylene, PMMA, etc., can be made using a mixture of light ethers or with iso-propanol. Use of strong solvents is not recommended due to the risk of damage to the plastic surface.
Pre-treatment of other surfaces can be made using acetone or trichloroethylene. Petrol or other solvents should never be used. Where possible, carry out a mechanically abrading to remove paint from the surfaces (where necessary) and to increase strength and holding gluing. Let dry the pre-treated area before applying the adhesive.
PRODUCT APPLICATION: AD6001 is available in bi-component cartridges by 50 ml and 178 ml. Blending should be made through static mixer composed by a minimum of 16 elements (PL.MIXE.050 or PL.MIXE.178).
REACTION MECHANISM: The speed of the harden reaction is mainly influenced by two factors: the application temperature and the application thickness. Being the reaction exothermic, the speed decreases as the thickness and temperature application decreases. Even if in smaller measure, the substrate influences the speed reaction. Materials with a high coefficient of thermo conductivity will tend to slow down the reaction. The maximal temperature of the reaction will be reached in 5 mm. application thickness and is always lower than 90C.
TYPICAL REACTION PROPERTIES
10 gr of product at 20 C
Property Value
Open time 1 min
Bonding time 5 min
Fully cured time 240 min
Temperature of exothermic reaction 80 C

PRODUCT STORAGE: AD6001 has a shelf life of 12 months from the initial production as long as it is stored in a cool and dry place, between +10 C and 25 C. Expiry date is indicated on the label. The cartridges have to be kept in a sealed plastic bag and protected from light and heating sources inside the original packaging Once opened, the cartridges will last until the expiry date (as long as the above conditions are met) leaving the last mixer to be used on the cartridge.
PRODUCT HANDLING CAUTIONS: Adhesive Dispensing Ltd products are generally quite harmless to handle provided that certain precautions are normally taken when handling chemicals are observed. The uncured materials must not be allowed to come into contact with foodstuffs or food utensils, and measures should be taken to prevent the uncured materials from coming in contact with the skin, since people with particularly sensitive skin may be affected. The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the use of eye protection.

The skin should be thoroughly cleaned at the end of each working period by washing with soap and warm water. The use of solvents has to be avoided. Disposable paper should be used to dry the skin.
Adequate ventilation of the working area is recommended. These precautions are described in greater detail in the Safety Data Sheet for the individual products and should be referred to for further information.
NOTE: The information, and, in particular, the recommendations relating to the application and end-use of Adhesive Dispensing Ltd products, are given in good faith based on our current knowledge and experience of the products when properly stored, handled and applied under normal conditions. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the users responsibility to determine suitability for the users purpose of any production method mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof.
Adhesive Dispensing Ltd specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of our products. Adhesive Dispensing Ltd specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request.

Features
  • Fast Hardening Time
  • Excellent grinding properties
  • High strength
  • Easy to apply
  • Over pain table
  • No marking through
  • Suitable for many different material

Related products...
Mix Nozzle 5.4mm ID x 17 EL # MA5.4-17S pk/100
Price: £40.41 Exc VAT

Add
MA5.4-17S Static Mixer Nozzle
50ml Pneumatic Dual Gun 1:1 ADCBA-25D
Price: £135.75 Exc VAT

Add
Pneumatic 50ml 1:1 Ratio Gun Part ADCBA-25D
50ml Manual Dual Gun 1:1/ 2:1 ABM-25M1
Price: £9.99 Exc VAT

Add
ABM-25M1 manual cartridge gun 50ml 1:1/2:1 Ratio


Browse for more products in the same category as this item:

Adhesives > Epoxy Resins