Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 30cc/ 30ml size syringe barrels. Ideal for low volume production, re-work or repair work.
Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. Simple 7:1 ratio leverage for effortless trigger movement. Adjustable shot control knob to set deposit size.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. All products ship direct from stock.
Materials: Polypro/ Nylon/ Steel
Capacity: 30cc or 30ml
Length: 250mm (including rod)
Height: 125mm
Weight: 140 grams (without barrel)
Colour: Blue
Warranty: 1 Year
This product is shipped with the following:
20 x 30cc clear barrel (part code 7300LL1NPK)
20 x 30cc white wiper piston (part code 730009WPK)
20 x 30cc red end cap (part code 73000CRPK)
20 x orange tip cap (part code 7015LLPK)
10 x 14 gauge tapered tip olive (part code TTN14)
10 x 16 gauge tapered tip grey (part code TTN16)
5 x 18 gauge tapered tip green (part code TTN18)
5 x 20 gauge tapered tip pink (part code TTN20)
5 x 22 gauge tapered tip blue (part code TTN22)
5 x 14 gauge general purpose tip 1/2" (TE714050)
5 x 15 gauge general purpose tip 1/2" (TE715050)
5 x 18 gauge general purpose tip 1/2" (TE718050)
Suitable materials proven to work with
this gun include solder pastes, solder fluxes, PVA glues, RTV's,
silicones, sealants, greases, SMT adhesives, pre-mixed and frozen
epoxies, single part epoxies, gels, adhesives, primers, inks and other
assembly fluids. Guns are portable and can be used in a factory production or assembly department as well as for repair and re-work. Guns are commonly used in the field for repair or maintenance applications. Common applications include:-
Deposits of solder paste
Deposits of solder flux
Grease to lubricate bearings
PVA glue to small furniture joints
RTV to seal cases
Silicone deposits and beads
Gasket sealant and silicone repair
Shots of roach insecticides / baits
General adhesive application
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Materials: Polypro/ Nylon/ Steel
- Capacity: 30cc or 30ml
- Length: 175mm
- Height: 135mm
- Weight: 140 grams
- Colour: Blue
- Warranty: 1 Year
This gun product is shipped with the following accessories:
20 x 30cc clear barrel (part code 7300LL1NPK)
20 x 30cc white wiper piston (part code 730009WPK)
20 x 30cc red end cap (part code 73000CRPK)
20 x orange tip cap (part code 7015LLPK)
10 x 14 gauge tapered tip olive (part code TTN14)
10 x 16 gauge tapered tip grey (part code TTN16)
5 x 18 gauge tapered tip green (part code TTN18)
5 x 20 gauge tapered tip pink (part code TTN20)
5 x 22 gauge tapered tip blue (part code TTN22)
5 x 14 gauge general purpose tip 1/2" (TE714050)
5 x 15 gauge general purpose tip 1/2" (TE715050)
5 x 18 gauge general purpose tip 1/2" (TE718050)
Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|
