* Please note - the JBE1113 was made obsolete by the manufacturer. Please use the DC50 new model or the TS9150 dispensers.
The JBE1113 is a cost-effective analogue dispenser. Its light weight and compact size makes this the ideal bench top dispensing solution for all your gluing, solder paste application and most other materials viscous or not.
Its simplified construction and operation makes it easy for even someone that has never used a dispenser before.
The unit comes with two modes; manual/ pre-set timer. Features vacuum suck-back to prevent drips of watery liquids.
Supplied complete with syringe barrel assortment, needle tip kit, adapter assembly hoses, foot switch, power cord, instruction guide and manuals.
Covered by a 1 year warranty.
This classic designed benchtop dispenser is simple to use and operate and we offer full technical support for setting up.
- Part ID: IJF JBE1113
- Timer: 0.01 - 31 seconds
- Output Pressure: Up to 100 psi
- Input Pressure: 70-100 psi
- Size: 22 x 21 x 6.7 cm
- Weight: 2.5 kg
- Input Voltage: 220 V AC
- Warranty: 1 Year
- Cycle Rate: Up to 600 cycles/minute
- Timing Repeatability: �0.1%
- Meets or Exceeds: CE Approved
This product is shipped with the following:
1 x power cord
1 x syringe stand holder (part code IJF560751)
1 x foot pedal and cord (part code IJF560027D)
1 x 30cc adapter assembly 3ft long hose (part code 73003RHB)
10 x 30cc clear barrel (part code 7300LL1NPK)
10 x 30cc white wiper piston (part code 710009WPK)
10 x 30cc red end cap (part code 71000CRPK)
10 x black tip cap (part code 7015LLBPK)
50 x assorted dispensing tips
This dispenser will apply most fluids, adhesives, gels and pastes. Use low pressure machine TS255 dispenser for extremely watery liquids. Use optional filter trap (part code 881-000-000) in the air adapter hose between dispenser and syringe. Do not use filter for high viscosity pastes as it restricts the air pressure to be used to around 25 psi. Use it with watery liquids as a safeguard against any potential fluids entering into the machine.
|
