|
Liquid Dispenser with Analog Timer, Vacuum Suck-back and Steady Mode
* Please note - the manufacturer made this product obsolete. Please use replacement DC50 dispenser or model TS9150 dispenser.
The
JB1113N is a liquid dispensing system designed to dispense
material from syringes and provides a simple and economic solution to
fluid dispensing. The unit can either be controlled with a foot pedal or
a finger switch for hand-held dispensing applications.
Its light weight
and compact size makes this the ideal bench top dispensing solution for
all your gluing, solder paste application and most other materials
viscous or not.
Its simplified construction and operation makes it easy for even someone
that has never used a dispenser before. The unit comes with two modes;
manual/pre-set timer
.
Features vacuum suck-back to prevent drips of
watery liquids.
Supplied complete with syringe barrel assortment, needle tip kit,
adapter assembly hoses, foot switch, power cord, instruction guide and
manuals
.
This
compact dispenser sits on the bench and requires an air input from any
compressor or factory mains supply. It comes with airline hose and
fittings kit to make connection easy. It will work with any power supply
and is supplied with plugs for use in most countries. Includes a
syringe stand, full syringe and piston pack and needle tip kit selection. Ready
to use out of the box
.
Size: 8.63" x 8.50" x 2.63" (21.92 x 21.59 x 6.68cm)
Dispense time: 0.01 - 31 seconds Cycle: Manual, Timer
Voltage: 110 VAC & 220 VAC (dual voltage)
Internal Voltage: 24 VDC
Air input: 70-100 psi (5-7 bar)
Air output: 1-100 psi (0.1-7 bar)
Standards: CE approved
Weight: 3.5 lbs (1.59 kg)
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
|
|
|
|
Applications
|
|
|
|
Dotting
|
|
Beading
|
|
Potting
|
|
Bonding
|
|
Sealing
|
|
Lubricating
|
|
