|
** This dispenser is now obsolete. For advanced features as a replacement machine - use TS350 dispenser.
Liquid Dispenser with Analog Timer, Vacuum & Gauge Suck-back and Large Exhaust
The
DSP502N is an automatic dispensing system featuring a vacuum gauge and is recommended for operations that
require an immediate and fast reaction for de-pressurization such as
tube or valve dispensing.
This is a system available
with 0-100 psi adjustable air regulator for most fluids and pastes. You hold the syringe like
a pen, adjust the air pressure to suit the liquid being dispensed then
press the foot pedal to apply. When the pedal is released, the
deposit instantly stops without drips or oozing. It is safe and simple
to use and reduces time spent manually applying liquids. The dispenser
is supplied with a user guide.
An adjustable vacuum
with gauge provides suck-back to the tip to prevent watery liquids from dripping.
We recommend the use of an inline filter on the air adapter to the
syringe when dispensing low viscosity fluids.
This
compact dispenser sits on the bench and requires an air input from any
compressor or factory mains supply. It comes with airline hose and
fittings kit to make connection easy. Suitable for voltage 110V or 220V. Includes a
syringe stand, syringe and piston pack and tip kit selection. Ready
to use out of the box.
Size: 10.50" x 8.25" x 2.63" (26.67 x 20.95 x 6.68cm)
Dispense time: 0.01 - 31 seconds
Cycle: Momentary with time or continously maintained
Voltage: 110 VAC & 220 VAC
Internal Voltage: 24 VDC
Air input: 70 to 100 psi (5 to 7 bar)
Air output: 1-100 psi (0.1 - 7 bar)
Standards: CE approved, RoHS compliant
Weight: 4 lbs 2ozs (1.87 kg)
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
|
