Precision fittings offer safe and leak free connections from syringe barrels to cartridges and pressure pots. This filter is used on air adapter assemblies when dispensing low viscosity fluids such as solvent based liquids, primers, activators and cyanoacrylates. Use as a safeguard to prevent fluid damage.

The TSD800-11 inline fluid filter is used in conjunction with pneumatic syringe dispensers and is the replacement disc only not including tubing barbs. It is attached to the airline hose assembly of any size adapter receiver. It is used to reduce potential fluids and adhesives from entering into a pneumatic dispenser via the syringe adapter hose. The filter element will reduce the flow back and to help to prevent damage. Part TSD800-11 is replacement filter part only.

Use with low viscosity liquids up to a maximum pressure of 25 psi. The adapter hose is cut and the filter is attached using the clamps and fittings included. When using 700 Series adapter heads, the ID of the clear tubing needs to be stretched to 0.013" before installing the fittings. Please note that this fitting does not guarantee liquids from entering a dispenser but is a safeguard. Please use care and attention when dispensing watery liquids with your syringe type fluid dispenser.

Adapter Sizes: All
Colour: White
Max Pressure: 25psi
Tube Sizes: 1/8", 1/4"
Material: Polycarbonate
Commodity Code: 39235010
Pack Size: 1

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: TSD800-11
• Material: Polyethylene/ polycarbonate
• Attachment: Luer lock
• Adapter Size: All Adapters
• Colour: Natural
• Details: Silicone Free

Adapter assemblies provide a leak free air feed from dispenser to syringe barrel at up to 100 psi. Air tubing should be periodically checked for any signs of damage. The o-ring on the head should be kept clean and replaced if it is damaged or contaminated.
The risk for watery liquids to be drawn back into any pneumatic syringe dispenser will be reduced by using this product. It is not required when dispensing thick pastes. A syringe wiper piston can also be used when dispensing liquids and this will also provide an additional level of safety. For information on syringe use, advice and support - please go to your knowledge base on this website or contact us.
This product will ship by courier on a tracked delivery direct from stock. For Europe deliveries, items are shipped via UPS. International shipments, are sent UPS, DHL or FedEx.