The Loctite 98815 30ml syringe dispenser is a hand-held, manually-operated dispensing tool that provides a convenient, cost-effective method of applying single-component adhesives. Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 30cc/ 30ml size syringe barrels. Ideal for low volume production, re-work or repair work.
Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure.
Materials: Polypro/ Nylon
Capacity: 30cc or 30ml
Length: 175mm
Height: 135mm
Weight: 110 grams
Colour: Blue Handle/ White Trigger
Warranty: 1 Year
Commodity Code: 84242000
Origin: Ireland
Brand: Loctite
This product is shipped with the following:
1 x 30cc clear barrel
1 x 30cc white wiper piston
1 x 30cc red end cap
1 x black tip cap
5 x 18 gauge tapered tips
Do not
use this product with Cyanoacrylate adhesives, rapid cure two-component
epoxies or aggressive solvents. Suitable materials proven to work with
this gun include solder pastes, solder fluxes, PVA glues, RTV's,
silicones, sealants, greases, SMT adhesives, pre-mixed and frozen
epoxies, single part epoxies, gels, adhesives, primers, inks and other
assembly fluids
.
Guns are portable and can be used in a factory production or assembly department as well as for repair and re-work. Guns are commonly used in the field for repair or maintenance applications. Common applications include:-
Deposits of solder paste
Deposits of solder flux
Grease to lubricate bearings
PVA glue to small furniture joints
RTV to seal cases
Silicone deposits and beads
Gasket sealant and silicone repair
General adhesive application
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Materials: Polypro/ Nylon
- Capacity: 30cc or 30ml
- Length: 175mm
- Height: 135mm
- Weight: 110 grams
- Colour: Red Handle/ White Trigger
- Warranty: 1 Year
This product is shipped with the following:
1 x 30cc clear barrel
1 x 30cc white wiper piston
1 x 30cc red end cap
1 x black tip cap
5 x 18 gauge tapered tip (part code TTN18)
Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|
