An efficient method of transferring greases, epoxies, silicones, solder pastes and other thixotropic materials into a disposable syringe barrel. These barrel loaders can be connected to a pneumatic dispenser (optional) to control the operation.

The model 560022 barrel loader is for pre-filled 12oz cartridges, which are placed inside a vertical container mounted on the stand. The barrel attachment assembly is threaded to accept luer lock barrels. Activating the optional dispenser once connected to the system causes the material to pump from the cartridge and to rise inside the barrel. This bottom filling method simplifies loading and reduces the possibility of entrapped air in the fluid.

The 560022 includes stand, retainer support, 12oz retainer and cap, one (1) empty 12oz cartridge and plunger, an outlet cap and special barrel attachment assembly.

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: 560022
• Materials: Polyethylene/ Steel/ Nylon
• Capacity: 12oz/ 360cc
• Weight: 1kg
• Max Pressure: 100 PSI
• Warranty: 12 Months

Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.