Type 304 Stainless steel manifold with 4 outlets. Divert flow from one outlet to multiple outlets. Ideal for feeding multiple metering valves. Plug unused ports with plug fittings. 1/2" NPT inlet to 4 x 3/8" outlets. Maximum pressure 500 psi. 0.200" mounting hole.
Specifications
Product Type In-Line
Manifolds
Branches 4
Distance from port centreline to end of manifold .63"
Distance between output port and centre lines .88"
Distance between mounting screw holes .20"
Distance between mounting screws (height) .89
Inlet centre line to edge .63"
Height 1
1/4" (3.2cm)
Dimensions 3
7/8" x 1 1/4" x 7/8" (9.9 x 3.2 x 2.3cm) Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Type In-Line Manifolds
- Branches 4
- Outlet port 3/8"
- Input port 1/2"
- Distance from port centerline to end of manifold .63"
- Distance between output port and center lines .88"
- Distance between mounting screws (length) 1.75"
- Distance between mounting screw holes .20"
- Overall length 3.88"
- Distance between mounting screws (height) .89"
- Inlet center line to edge .63"
- Dimensions 3 7/8" x 1 1/4" x 7/8" (9.9cm x 3.2cm x 2.3cm)
- Width 3 7/8" (9.9cm)
- Height 1 1/4" (3.2cm)
Items are shipped by tracked couriers
|