This versatile adapter converts any 310ml sealant and silicone type cartridge for filling syringe barrels direct from sealant tubes. It threads over the 310ml cartridge tube end to provide a luer lock twsit-on syringe barrel attachment.

A high density reusable nylon adapter fitting that is used on pre-filled 310ml (1/10 gallon) size caulking tube cartridges.

This part is ONLY for use with pre-filled sealant type cartridges and will adapt these for syringe filling. Supplied complete as a kit with syringe adapter for syringe filling and part luer lock cap to seal end against air when not being used.

Parts included are: 1 x TSD931-296 Adapter, 1 x TSD931-15 Syringe Filling Fitting, 1 x TSD931-3N Cap Seal.

The adapter is attached to the 310ml cartridge. An empty syringe with piston pre-inserted to the bottom is twisted on. Using one of our pneumatic barre fillers or a 310ml sealant gun, material is pushed from the silicone/ sealant tube to bottom fill the syringe barrel. As the sealant transfers, it pushes the piston up for an air-free fill. It is quick, clean and ensures the sealant is not exposed to air..

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: TSD931-296-15-3
• Material: High Density Nylon/ HDPP/ HDPE
• Thread: Cartridge end to Female luer lock
• Colour: White/ Black
• Details: Silicone Free

Fittings are designed to be disposable after a period of time. Using tip caps (7015LLBPK) will ensure the end of male fittings are sealed from the air when not in use. Using cap TSD931-3 will seal the end of female luer lock parts. This product will ship by tracked courier.