The TS7000 Series IMP Rotary Valves are the latest additions to the Rotary Microvalve family. The valve uses a feed screw (auger) to dispense fluid with a rotary displacement action, allowing ultra-precise control of the dispensing process. The valve's modular design allows quick and easy replacement of the feed screw/chamber cartridge assembly without removing the valve from the machine.
In addition, the valve cartridge can be interchanged to use with DMP feed screw inserts.
The TS7000 Series IMP valve is available in 3 choices of feed screw sizes (16-pitch, 8-pitch and high output 8-pitch), all made of precision hardened tool steel. This encoder motor version is for applications that require closed-loop motor control with encoder feed back.
Length (without dispense tip): 6.78 Inch (172.2mm)
Width: 3.70 Inch (94mm)
Weight: 0.86lb (0.40 kg)
Wetted Parts: Heat treated Tool Steel, Stainless steel, UHMWPE, Turcite, Nylon
Motor : 6-Watt, 400 RPM (no load)
Encoder: 500 counts/turn
Input Voltage: 5 to 24 VDC
Recommended Fluid Pressure: 30 psi (2.07 bar)
Viscosity range: 30K to 1300K Cps.
- Length (without dispense tip): 6.78� (172.2mm)
- Width: 3.70� (94mm)
- Weight: 0.86lb (0.40 kg)
- Wetted Parts: Heat treated Tool Steel, Stainless steel, UHMWPE, Turcite, Nylon
- Motor : 6-Watt, 400 RPM (no load)
- Encoder: 500 counts/turn
- Input Voltage: 5-24 VDC
- Recommended Fluid Pressure: 30 psi (2.07 bar)
- Viscosity range: 30K - 1300K Cps.
Recommended Controller: TS500R Digital Controller
Material Reservoir: The TS7000 Series valve can be fed directly from a syringe (3-55 cc) or can be fed
remotely from a cartridge or a pressure tank.
Dispense Tip: Precision dispense tip such as the TE series, TS-SS series or TT series is recommended
|
