TS20-1 TS Tip 20 gauge Yellow Crimped Hub 1" Long Adhesive Dispensing

Products

Solutions

Home > Components > Luer Lock Tips > TS Aluminium Crimped Tips >

20 Gauge 1.0" Long Tip Crimped TS20-1

TS20-1

Alternative Views:

Price: £13.50 Exc VAT

Stock Status:In Stock

Availability:: Ships In 24 Hours
Product Code: TS20-1

Qty:

Description

Technical Specs

More Information

The TS Series dispensing tips offer a variety of dispensing performance and flexibility options. Stainless steel tubing is cut to precise lengths and ground to be burr-free. Cut tubing is crimped into aluminium locking insert, then moulded into polypropylene hubs. Moulded hub colours correspond to gauge size.

All TS Series tips secure to syringe barrels and correspond to the luer lock specification. Tips are colour coded for gauge size. The tip uses a slightly tapered internal design where the shaft joins the hub to ease fluid flow and reduce restriction. This allows for a lower pressure to be used for dispensing liquids and pastes.

Part ID: TS20-1
Materials: Polypropylene/ Stainless Steel
Hub Colour: Yellow
Inner Diameter: 0.024" - 0.61 mm
Outer Diameter: 0.036" - 0.91 mm
Tube Length: 1.00" - 25.40 mm
Tip Details: Industrial grade, Silicone Free
Commodity Code: 90289090
Brand: TSI

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

1. Why are these tips good for solvents? Solvents and solvent based glues can attack tips that are assembled using glues. Some precision tips have the metal tube glued to the plastic hub (usually a UV cure clear adhesive is used). Where this adhesive bond is used, some aggressive solvents can break it down causing the glue bond to fail. So using these aluminium crimped tips will overcome this.

2. How do we clean these tips? We recommend all dispensing tips are replaced each time a new dispensing application is started. By cleaning with solvents, there is a chance that dried residue of adhesives or pastes will contaminate fresh materials. For fluids that do not cure such as lubricants, cleaning will not be required.

3. What is the delivery time on these products? We hold stocks of these parts so for UK & Ireland customers, goods are received by tracked courier within about 48 hours. For customers in Europe, delivery is 24 - 72 hours. For customers outside of Europe, delivery is around 3-4 days. We always send using a tracked courier.

4. How do these tips compare to others I've seen? Our tips are industrial grade safe so can be used at high pressures. They are silicone-free materials so will not contaminate fluids dispensed through them. The tips have high tolerances and can be used on automated dispensing equipment. The tubes are burr-free stainless steel. We sell in sealed and labelled packs with batch codes.

5. What fluids can be used with these tips?. Solvents, solvent based glues, lubricants, paints, inks, oils, silicones, sealants, RTVs, solder pastes, fluxes, UV cure adhesives, epoxies, PUs, PVAs, chemicals and more. Avoid using these tips with Cyanoacrylate adhesives which will clog against the metals - use Teflon lined tips. If dispensing a very high viscosity filled paste, consider using our smooth flow tapered tips.

General purpose TS tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. For Cyanoacrylate adhesives, we recommend using our Teflon, Teflon Lined or Polypro tips. For high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds, we suggest the use of our tapered tips. General purpose TS tips are safe for use up to 100 psi pressure. TS tips are certified silicone-free components and will not contaminate any fluids that are dispensed from them.