Contain and filter for a cleaner, healthier working environment within dental labs, electronic design and rework, pharmaceutical labs, education and more. For use in numerous situations where external venting is impractical but where contaminant capture and filtration is necessary.

Applications include the filtration of fume, vapour and particulates emanating from monomers, adhesives, hazardous powders/particulates, conformal coatings, resins, sealants, solders, light grinding particles and dusts, organic solvents etc.

* 2 Year Warranty. CE certified.

Part ID: T700S-C
Fan Motor Spec: 230V 50Hz 210W
Air Volume at Free Air: 710 m3/hr
Air Velocity at Filter Face: 0.57 m/sec
Air Velocity at Hood Face: 0.55 m/sec
Noise Level: 62 dB (A)
Weight: 37 kg

What is included with the T700S-C?
Filter unit with 2 x Centrifugal blowers
Clear Acrylic Spray Shield for enhanced visibility
Particulate filter
1 x Activated Carbon filter
Power Lead
Data/Warranty Booklet

Where can the BV700S-C filtration cabinet be used?

The T700S-C has been designed so it can be used in numerous situations where external venting is impractical but where contaminant capture, containment and filtration is necessary. Its small footprint makes it ideal for the active filtration of fumes, vapour and particulates emanating from: monomers, adhesives, hazardous powders/particulates, conformal coatings, resins, sealants, solders, light grinding particles and dusts, organic solvents etc.

These units are designed for immediate operator protection from concentrations of airborne contaminants whereby gases, fumes, vapours and particulates at the front of the unit are drawn into the intake filter. Cleaned air is exhausted to the top rear of the cabinet.

The folding PETG shield can be stored if not required thus reducing the unit footprint considerably. Handling and / or use of potentially harmful substances is carried out in front of the intake filter area. Cleaned air is vented to the top rear of the units.

Key Features
Dual airspeed function to facilitate higher vapour adsorption
Carry handles
Can be assembled in seconds
Low noise level
Can be assembled in seconds; place onto a desk, bench or trolley and then simply plug in and switch on

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

• Part ID: T700S-C
• Fan Motor Spec: 230V 50Hz 210W
• Air Volume at Free Air: 710 m3/hr
• Air Velocity at Filter Face: 0.57 m/sec
• Air Velocity at Hood Face: 0.55 m/sec
• Noise Level: 62 dB (A)
• Weight: 37 kg

Fan/filter casing (steel construction finished in dove grey) - clear PETG folding plastic fume shield - particulate (Intake Filter) - bonded carbon filter - 2 x centrifugal blowers, external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filters. T700S-C has a dual airspeed function to facilitate higher vapour adsorption.
*110V 60Hz version available if required.

All WS filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.

The folding PETG shield can be stored if not required thus reducing the unit footprint considerably. Handling and / or use of potentially harmful substances is carried out in front of the intake filter area. Cleaned air is vented to the top rear of the units.