Contain and filter for a cleaner, healthier working environment within dental labs, electronic design and rework, pharmaceutical labs, education and more.
For use in numerous situations where external venting is impractical but where contaminant capture and filtration is necessary.
Applications include the filtration of fume, vapour and particulates emanating from monomers, adhesives, hazardous powders/particulates, conformal coatings, resins, sealants, solders, light grinding particles and dusts, organic solvents etc.
Part ID: T500S-C
Fan Motor Spec: 230V 50Hz 105W
Air Volume at Free Air: 355 m3/hr
Air Velocity at Filter Face: 0.50 m/sec
Air Velocity at Hood Face: 0.38 m/sec
Noise Level: 60 dB (A)
Weight: 25 kg
Warranty: 1 Year
Approvals: CE, REACH, COSHH
Commodity Code: 84213925
Origin: GB
Adhesive Dispensing Ltd provide a wide
range of equipment options for dispensing almost all assembly fluids - from
watery liquids, solvents, primers and activators through to thick pastes,
sealants, silicones, gels and epoxies.
- Part ID: T500S-C
- Fan Motor Spec: 230V 50Hz 105W
- Air Volume at Free Air: 355 m3/hr
- Air Velocity at Filter Face: 0.50 m/sec
- Air Velocity at Hood Face: 0.38 m/sec
- Noise Level: 60 dB (A)
- Weight: 25 kg
Fan/filter casing (steel construction finished in dove grey) - clear PETG folding plastic fume shield - particulate (Intake Filter) - bonded carbon filter - centrifugal blower, external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filters.
*110V 60Hz version available if required.
All WS filtration and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
The folding PETG shield can be stored if not required thus reducing the unit footprint considerably. Handling and / or use of potentially harmful substances is carried out in front of the intake filter area. Cleaned air is vented to the top rear of the units.
|
